« previous next »
Pages: [1] 2

Author Topic: where do i start  (Read 2320 times)

Offline gti noob

  • Not said much yet
  • **
  • Posts: 13
where do i start
« on: 14 February 2009, 20:08 »
right,deep breath....
i just bought a mk4 2.0 gti today and she has a few issues.
she's a 99'plate with 70 000 on the clock.she's been lowered,alot! im reckoning nigh on 50-60mm.she's got a nice set of what im sure are audi rims.i'll post pics soon.

on full lock the drivers side screeches/whines,im thinking cv joint?!not sure.the front end of the car feels almost like it's knackered.it feels lazy,make sense?my guess is that the front bushes are shot.there's no arch rub,have no idea how its not rubbing as the boots she's on are huuugge.

the sun roof will tilt but wont slide either.thats just the start of it ( he says sobbing on the laptop) alot of the other stuff involves me a bag of spanners and a friendly scrappy that doesn't mind me sleeping there :)any info will be greatly appreciated.

my hope is one day she will be a minter,but damn have i got a long way to go to achieve that!
« Last Edit: 14 February 2009, 20:10 by richw911 »
Logged

Offline Kerrse

  • I live here
  • *****
  • Posts: 873
Re: where do i start
« Reply #1 on: 14 February 2009, 20:12 »
Welcome, hope you paid a cheap price for a car with all these faults ??
Logged

Offline T_J_G

  • Serious forum addict
  • *
  • Posts: 8,279
Re: where do i start
« Reply #2 on: 14 February 2009, 20:31 »
Maybe the driveshaft rubbing as it's been lowered over 40mm.
Logged

Offline northeast_gti-t

  • Serious forum addict
  • *
  • Posts: 6,554
  • "1.8T AGU"
Re: where do i start
« Reply #3 on: 14 February 2009, 20:43 »
will most prob be the driveshaft rubbing as anything lowered over 50mm may/may not rub on the front arb so look at replacing front arb/droplinks
Logged
2000 Mkiv GTi 1.8T AGU

Offline jonnyturbo

  • Forum addict
  • *
  • Posts: 4,806
Re: where do i start
« Reply #4 on: 14 February 2009, 20:45 »
yup mine rubs as it has had a 50mm drop
Logged
Gone but still keeping a close eye on it...

Mk4 golf 1.8t AUM Hybrid K03s. Custom Mapped by R-tech to 260bhp. CR hybrid turbo Audi TT injectors / fuel pump, Forge tip,THS FMIC,Carbonio CAI, Full milltek turbo back, N249 bypass, Fully poly bushed, Weitec coils. Genuine R32 front bumper and Genuine R-line rear, Genuine Porsche twists, Anniversary black interior.

Offline northeast_gti-t

  • Serious forum addict
  • *
  • Posts: 6,554
  • "1.8T AGU"
Re: where do i start
« Reply #5 on: 14 February 2009, 20:47 »
and jonnys going to be replacing his arb  :grin: :grin: :grin: :laugh:
Logged
2000 Mkiv GTi 1.8T AGU

Offline sambo

  • I live here
  • *****
  • Posts: 1,057
Re: where do i start
« Reply #6 on: 14 February 2009, 20:50 »
Easy to check, put steering on full lock. Check drivers side driveshaft for a mark around it. Only rub's on drivers side due to large diameter driveshaft. ARB 'hoop' will be within an inch of driveshaft probably.

Mine rubbed like a cheap pair of speedo's until i got a new ARB. Don't try using adjustable droplinks, there crap. Instead buy the whiteline front ARB from balance motorsport. It is the only bar designed to go under the driveshaft and completly eliminates the problem  :cool:

If it's to low the lower arms will rub too but i doubt your that low!

Sam
« Last Edit: 14 February 2009, 20:53 by sambo »
Logged
Sam



AXX power!  ..   Tinkering has started.... :smiley:

Offline gti noob

  • Not said much yet
  • **
  • Posts: 13
Re: where do i start
« Reply #7 on: 14 February 2009, 21:07 »
sadly its become ever clear that i got done :( i paid 2500 for her,i know,i know!
thanks for the advice,have just ordered a whiteline arb and then the real fun starts when i try and workout how to fit it.lol
you wouldn't believe i work for a race team and know sweet FA about motors.thinking im gonna learn real fast.
thanks again boys
Logged

Offline richw911

  • 10k hero
  • *
  • Posts: 18,673
  • The Linkmeister and an OEM Freak.
Re: where do i start
« Reply #8 on: 14 February 2009, 21:14 »
Quote from: gti noob on 14 February 2009, 21:07
sadly its become ever clear that i got done :( i paid 2500 for her,i know,i know!
thanks for the advice,have just ordered a whiteline arb and then the real fun starts when i try and workout how to fit it.lol
you wouldn't believe i work for a race team and know sweet FA about motors.thinking im gonna learn real fast.
thanks again boys

lots to learn in here  :laugh: how to spend on more mods  :grin: :grin:
Logged

MKIV Mod Squad™ a part of the headlight police.

Offline sambo

  • I live here
  • *****
  • Posts: 1,057
Re: where do i start
« Reply #9 on: 14 February 2009, 21:38 »
Not much to spend it on if you own a 2.slow though  :grin:



Logged
Sam



AXX power!  ..   Tinkering has started.... :smiley:
Pages: [1] 2
« previous next »