« previous next »
Pages: [1]

Author Topic: 160 mph clocks in my j plate driver  (Read 2385 times)

Offline lowgolf

  • Here all the time
  • ****
  • Posts: 347
160 mph clocks in my j plate driver
« on: 23 May 2004, 10:19 »
Is this a straight swop? My car is a 1991 and has rev counter already
Logged
<br /><br />Yeah!!!

Offline Davs mk2 16v

  • Not said much yet
  • **
  • Posts: 43
Re:160 mph clocks in my j plate driver
« Reply #1 on: 23 May 2004, 17:45 »
assuming the clocks have the same single plug design, they will work just fine.

if the 16v clocks are the twin plug design, im afraid they wont.

i do have a set of these hangin in my garage if u need the single plug type...  ;)
Logged

Veedubgt18v

  • Guest
Re:160 mph clocks in my j plate driver
« Reply #2 on: 23 May 2004, 20:00 »
just wondering why?
Logged

Offline lowgolf

  • Here all the time
  • ****
  • Posts: 347
Re:160 mph clocks in my j plate driver
« Reply #3 on: 24 May 2004, 00:03 »
Because everything on my car is now 90's spec, apart from engine (of course) and speedo. Just wondering if it was a straight swop. Ill take em off and have a look at the back
Logged
<br /><br />Yeah!!!

Offline Davs mk2 16v

  • Not said much yet
  • **
  • Posts: 43
Re:160 mph clocks in my j plate driver
« Reply #4 on: 24 May 2004, 00:36 »
if urs is a J plate, it will have the single plug

its the '89 cars and earlier that have double plugs
Logged

Veedubgt18v

  • Guest
Re:160 mph clocks in my j plate driver
« Reply #5 on: 24 May 2004, 15:27 »
Quote from: lowgolf on 24 May 2004, 00:03
Because everything on my car is now 90's spec, apart from engine (of course) and speedo. Just wondering if it was a straight swop. Ill take em off and have a look at the back

would be good if it hit 160mph. bit dodgy in  a mk2 tho!  :o
Logged

Offline lowgolf

  • Here all the time
  • ****
  • Posts: 347
Re:160 mph clocks in my j plate driver
« Reply #6 on: 24 May 2004, 15:49 »
Ive had my drive off the clock down a big hill on the A500. But it only pushes 110 ish on the flat
Logged
<br /><br />Yeah!!!

Offline rubjonny

  • 10k hero
  • *
  • Posts: 16,349
  • Hello, my name is John and I'm a dub addict.
Re:160 mph clocks in my j plate driver
« Reply #7 on: 31 May 2004, 19:54 »
You can swap the speedos between the clocks if they have different plugs, its easy to do.

Just take out the 8 screws/bolts on the back and swap the 'L' shaped circuit board thats clipped into the speedo (it has a thin black connector that clips to the blue PCB sheet, just be carefull and it will come off)
Logged
Hello my name is John and I'm a dub addict.
Pages: [1]
« previous next »