« previous next »
Pages: [1]

Author Topic: will a mk3 8v master cylinder fit a mk2 1.3  (Read 2197 times)

Offline leeroy20vt

  • I live here
  • *****
  • Posts: 1,951
  • h reg mk2 gti
will a mk3 8v master cylinder fit a mk2 1.3
« on: 18 July 2010, 22:02 »
as above doin a wide track conversion will it fit or will the original be ok

cheers
« Last Edit: 18 July 2010, 22:46 by leeroy20vt »
Logged

Offline fishnchipsx2

  • Here all the time
  • ****
  • Posts: 356
Re: will a mk3 8v master cylinder fit a mk2 1.3
« Reply #1 on: 18 July 2010, 23:20 »
Check the mounting holes... it may fit, but rotated at an angle of about 30 degrees, meaning that the reservoir will be on the piss - not ideal for an MOT!
Logged

Offline leeroy20vt

  • I live here
  • *****
  • Posts: 1,951
  • h reg mk2 gti
Re: will a mk3 8v master cylinder fit a mk2 1.3
« Reply #2 on: 19 July 2010, 08:36 »
cheers fella
Logged

Offline rubjonny

  • 10k hero
  • *
  • Posts: 16,349
  • Hello, my name is John and I'm a dub addict.
Re: will a mk3 8v master cylinder fit a mk2 1.3
« Reply #3 on: 19 July 2010, 11:47 »
should fit straight on, they use same 22mm MC as late MK2 16v & G60
Logged
Hello my name is John and I'm a dub addict.

Offline leeroy20vt

  • I live here
  • *****
  • Posts: 1,951
  • h reg mk2 gti
Re: will a mk3 8v master cylinder fit a mk2 1.3
« Reply #4 on: 19 July 2010, 11:50 »
goin back to ur pms tho wont be much cop for the 288 mk3 brakes tho will it ?

and out of all the stuff i got i havent got a mk2 1.8 servo typical a
Logged

Offline rubjonny

  • 10k hero
  • *
  • Posts: 16,349
  • Hello, my name is John and I'm a dub addict.
Re: will a mk3 8v master cylinder fit a mk2 1.3
« Reply #5 on: 19 July 2010, 11:54 »
yeah it'll be fine on 288s, same as whats fitted to the MK3 with 288sas standard ;)

its the servo you need to change, want a 9" servo from mk2 1.8, or corrado/passat. unfortunatly mk3 one is no use as totally wrong fitment. needs to be from passat pre-97, b3 or b4 shape. abs servo will work too, it'll just have an extra switch in the side of it which you leave in place but unplugged
Logged
Hello my name is John and I'm a dub addict.

Offline leeroy20vt

  • I live here
  • *****
  • Posts: 1,951
  • h reg mk2 gti
Re: will a mk3 8v master cylinder fit a mk2 1.3
« Reply #6 on: 19 July 2010, 11:58 »
ar just relised i missed part of the question lol should of put will it fit on a 1.3 servo  :embarassed:

o well thats goin to hold me up till i find one as its much easier to fit without engine in  :cry: :cry:

cheers rj
Logged

Offline rubjonny

  • 10k hero
  • *
  • Posts: 16,349
  • Hello, my name is John and I'm a dub addict.
Re: will a mk3 8v master cylinder fit a mk2 1.3
« Reply #7 on: 19 July 2010, 12:04 »
yeah it'll fit, but as i say you'll want to bin that servo and get a 9" one :)

you can fit one with engien fitted, i have done it on an 8v and that was with the inlet manifold on the car as well! theres literally a MK2 servo shaped gap  :grin:
be fine with a 16v engine fitted without the inlet, should be tons o room. i didn't even disconnect the master cylinder to do it, i just carefully pushed it out of the way.
Logged
Hello my name is John and I'm a dub addict.

Offline leeroy20vt

  • I live here
  • *****
  • Posts: 1,951
  • h reg mk2 gti
Re: will a mk3 8v master cylinder fit a mk2 1.3
« Reply #8 on: 19 July 2010, 12:05 »
Quote from: rubjonny on 19 July 2010, 12:04
yeah it'll fit, but as i say you'll want to bin that servo and get a 9" one :)

you can fit one with engien fitted, i have done it on an 8v and that was with the inlet manifold on the car as well! theres literally a MK2 servo shaped gap  :grin:
be fine with a 16v engine fitted without the inlet, should be tons o room. i didn't even disconnect the master cylinder to do it, i just carefully pushed it out of the way.

ok  :cool: :cool: mayby engine will be in today then  :smiley:
Logged
Pages: [1]
« previous next »