Frequently asked questionsI think it’s about time we have some easily available info for new/old users about the basics of modifying and common issues. Please remember these are based for us less talented mechanical monkeys
Mods please don’t move this to the Info and maintenance section as not many people look in there! Can it be stickyed in here?
Before posting a new topic, try a search. Or at least have a look in this section as there is A LOT of info in there.
http://www.golfgtiforum.co.uk/index.php?board=57.0Suspension1st question people always ask are: “Are these any good†(With a link to Ebay referring to either Hottuning/JOM/Jamex Coilovers. These are budget coilovers, as stated in the ad. Some people haven’t had issues where as the majority do (Squeaking and seizing) still value for money. For a proper decent setup your looking at £600+ although SPAX are very good value for money too.
REMEMBER YOU GET WHAT YOU PAY FOR!Induction Kit/Drilled AirboxFor any real gains in this department you NEED to have cold air going in to the engine. There is no point of bolting on an induction kit as this will do nothing but suck in hot air. People have found the cheapest and easiest thing is to drill your current airbox with a performance filter (K&N and Pipercross seem to be favourites).
Here is a link:
How to:
http://forums.vwvortex.com/showthread.php?3063843Gains:
http://www.golfgtiforum.co.uk/index.php?topic=129025.0You can still run an induction kit, but make sure it it’s protected from the heat and your running a cold air feed. For the VR6 the most popular kit is the BMC CDA kit.
Exhaust systemsA lot of people run cat back systems. Jetex, Magnex, Scorpion and Milltek all have good reputations.
If I remember correctly, all the 8v/16v/VR6 systems fit but the 8v uses a short reducer on the cat back.
De-arching/re-arching, Bumpers, Lights and InteriorGTI/VR6 arches can be removed by drilling out the rivets under the wing. You will then need to replace the side trim with CL/GL side trim.
Later VR6 models came smoothed.
Textured bumpers and smooth bumpers are interchangeable between all models.
Anyone who doesn’t own a GTI/VR6 that want to upgrade their interior. This is the easiest way to improve it. Simply just replace the seats and door cards with the GTI ones, VR6 leather will also fit. Will make a big improvement for little cost 5 door and 3 door seats will all fit with out a problem, however door cards won't.
Common issues and faults.Cutting out:
http://www.golfgtiforum.co.uk/index.php?topic=2080.0Interior wetness:
http://www.golfgtiforum.co.uk/index.php?topic=59014.0Common Faults:
http://www.golfgtiforum.co.uk/index.php?topic=31354.0But as stated earlier, please look in this section as there are lots of helpful hints and tips
http://www.golfgtiforum.co.uk/index.php?board=57.0Paint CodePaint codes can be found on the sticker in the boot, or on the service book.
Vento FrontTo acheive the Vento look all you need is the bonnet, lights and grill. NOT the slam panel!
1.8T ConversionBefore asking this daily question please have a search or if you don't know how/can't be bothered some info can be found here:
A basic list of what you may need:
http://www.golfgtiforum.co.uk/index.php?topic=213901.0Please remember that depending on your base then you may need more then is specified.
http://www.golfgtiforum.co.uk/index.php?topic=124485.0http://www.golfgtiforum.co.uk/index.php?topic=209521.0If there is anything wrong or needs adding, just let me know and I will change/update
