Author Topic: can any shed a bit of light on this  (Read 1673 times)

Offline bazzza

  • Not said much yet
  • **
  • Posts: 86
can any shed a bit of light on this
« on: 10 December 2008, 15:51 »
what it is........... i had salad cream in my oil so i change it an it was white so was the filter so any way my water keep boilin out of the bottle,and i took the dip stick out and water was spittin out, i think this was just the condensation,my car runs all right the water temp is half way, oil 88/90 dont know what to do i also took the cam off an buckets out cleaned the lot and put a new cam belt on,i think the head might have a crack in it or somthin, it a 1.8 8v engine code ev147603 ,,,,,,,,,,

Offline AlanD

  • Serious forum addict
  • *
  • Posts: 9,946
  • MK5 2.0T 16v
Re: can any shed a bit of light on this
« Reply #1 on: 10 December 2008, 15:54 »
You had water spitting out of your dip stick !?

Doesnt sound good mate, head gasket sounds like its in all sorts of trouble :(

nige_s

  • Guest
Re: can any shed a bit of light on this
« Reply #2 on: 10 December 2008, 16:00 »
Guess you've got to remove the head at least to replace the gasket, then send it off for crack testing before refitting.

Assume its got the proper amount of anti freeze in it as well?

Offline sidecarphil

  • I live here
  • *****
  • Posts: 1,186
Re: can any shed a bit of light on this
« Reply #3 on: 10 December 2008, 17:38 »
water out of the dipstick  :shocked: :shocked:

my god i have you got a K-series in it  :undecided: :undecided: :undecided:

Offline bazzza

  • Not said much yet
  • **
  • Posts: 86
Re: can any shed a bit of light on this
« Reply #4 on: 10 December 2008, 18:53 »
when i rev it thats when the water comes out of the bottle might just run it an see what happends as its been sat on my drive just dont wont to break down :sick:

Offline Mk2Kezza

  • Here all the time
  • ****
  • Posts: 405
Re: can any shed a bit of light on this
« Reply #5 on: 10 December 2008, 19:05 »
There may be a hairline fracture in your head thats pressurising the coolant system, this may also allow water into the oil......

You can get the coolant tested for carbon dioxide, that will shed more light.
<br />Almost finished.....

Offline bazzza

  • Not said much yet
  • **
  • Posts: 86
Re: can any shed a bit of light on this
« Reply #6 on: 10 December 2008, 20:45 »
do u think it will be all right to run  about in.. am on  on the look out 4 a engine had it with this engine?

Offline danny_p

  • Forum addict
  • *
  • Posts: 4,646
Re: can any shed a bit of light on this
« Reply #7 on: 10 December 2008, 21:10 »
just skim the head and put a new gasket in with new bolts. these heads rarely crack  and if it has you see it between the valve seats
all the VW's have gone bar 1.

Offline Ben Lessani

  • I live here
  • *****
  • Posts: 3,873
  • The poor mans MK2 Haynes author
Re: can any shed a bit of light on this
« Reply #8 on: 10 December 2008, 21:55 »
I'd pressure test the head, the tool is only about £15 from Halfords.

Sounds more like water is getting in through the oil cooler than the head?

Offline nealey

  • I live here
  • *****
  • Posts: 1,062
Re: can any shed a bit of light on this
« Reply #9 on: 10 December 2008, 22:37 »
I'd pressure test the head, the tool is only about £15 from Halfords.

Sounds more like water is getting in through the oil cooler than the head?

If its spitting water out of the dipstick i wouldnt think that would be oilcooler, its more likely a faulty headgasket overpressuring the cooling system, my mate had it on his and it was spraying coolant out of everywhere!