hey,
been trying to start my 16v for a few weeks now, with no luck........

whipped the rocker cover off to triple check cam timing, all ok there, but noticed a strong smell of fuel. dipped my finger in the oil collected in the head, it was well diluted with loads of fuel. checked the dipstick, and the same strong smell of fuel and the level had risen by about 5mm.
dropped the oil, changed filter and refilled with new oil. I'm thinking that the fuel contamination happened from repeated turning over and possibly a faulty 5th injector, as the car was running rich before. am going to do several oil/filter changes once i get the car running, to make sure all the petrol is gone.
anyway, the problem i have now is...........tried turning the car over once after changing the oil. the starter really struggled to turn it over. only tried it briefly once, but i heard a small squeak from the bores when turning.
i'm thinking that the petrol has weeped through the piston rings into the sump, and has taken the oil off the rings with it?
can i add a small amount of oil to each bore through the sparkplug hole to help lubricate the rings? or should i get the head off again and change the rings etc. while i'm at it?
i kind of already know what i should do, was just wondering what you guys would do in this situation.
thanks in advance,
james.
