Author Topic: Clean up rust on Engine  (Read 841 times)

Offline dj.paterson

  • Not said much yet
  • **
  • Posts: 22
Clean up rust on Engine
« on: 14 September 2008, 23:47 »
I have an 8V Golf GTI mk2. It has 137,000 miles on clock. The engine looks really rusty, what can I do to make it look like new? I can see pictures of low mileage GTIs and it looks as if they have black paint on the engine cover.

Offline bomp

  • Here all the time
  • ****
  • Posts: 430
Re: Clean up rust on Engine
« Reply #1 on: 15 September 2008, 02:26 »
Well something like this http://www.toolsinstock.com/index.php?act=viewProd&productId=390842  connected to a drill with something like this http://www.toolsinstock.com/index.php?act=viewProd&productId=378755 on the end, will get the rust off. Brush the dust off then paint the metal with a coat of Kurust, then use black Hamerite on the metal once it's dried. Most people use Hamerite anyways.
Life is like a skid mark on a toilet bowl.  Sooner or later someone\\\'s going to pi$$ you off.

Offline Mr Blue

  • Forum addict
  • *
  • Posts: 6,133
Re: Clean up rust on Engine
« Reply #2 on: 15 September 2008, 22:17 »
Before you paint the parts. Jet wash the bay and put the nozzle real close to the engine block. Works well.

I then used a wire brush, some sand paper and some thinners.

I just painted it up while the engine was in bits as it made sence. It can be done by just removing all the parts/pipes and wires out the way.

nothing special but less of an eye sore

before



:)