Im going to order this thursday unless someone says otherwise!

[Grim_Reaper]

i think eGay is your best freind...can find some pretty good stuff on there sometimes

[Mikester]

well i need a new exhaust ASAP to get thorugh the MOT. And i dont fancy another standard, but to hell with spending 150-200+ on it.

And that is made for a 2l gti not 16v, so i guess it will fit fine.

And it is the volksbit one.

So is it really that bad?

[saul79]

its just a cheap exhaust ,get a 2nd hand one for the mot and save some pennys for a decent zaust

[Mikester]

its just a cheap exhaust ,get a 2nd hand one for the mot and save some pennys for a decent zaust

Hmmmm well its blowing, but im not even sure if its blowin from the box. Im just hoping it is! haha.

Is not that i have to save for it, i just cant justify that on an exhaust back box. its stupid, just for a lump of metal, my car only cost 900, so 200+ on the exhaust, just no!

[saul79]

i got mine made for 80 quid , if its blowing a lot get some zaust wrap on it and do as it says on the pack lol and let it to dry ,as long as its not broken 3 quarters the way round the wrap will work

[Mikester]

i got mine made for 80 quid , if its blowing a lot get some zaust wrap on it and do as it says on the pack lol and let it to dry ,as long as its not broken 3 quarters the way round the wrap will work

Ok, well i have tomo off, so i figure if i start it up and get my bro to rev it i wil be able to see where its blowing?

[remapped]

yep that is the volks bits one dose say for 8v and not 16v


http://www.independent-inventory.com/shop/product_info.php?products_id=2349

also would you need this part ??

http://www.independent-inventory.com/shop/product_info.php?products_id=2337

[boneybradley]

yep that is the volks bits one dose say for 8v and not 16v

http://www.independent-inventory.com/shop/product_info.php?products_id=2349

also would you need this part ??

http://www.independent-inventory.com/shop/product_info.php?products_id=2337

its one of them that I have fitted and there was no way it would direct bolt to my 8v!! the bore was 52mm and so is my middle box!! I had to sleve it!

[remapped]

mmmm its a tad to much hassle !!!
gona say look on ebay for a nice second hand set up ! or yep save up the notes  :embarassed:

[Guy]

i got mine made for 80 quid , if its blowing a lot get some zaust wrap on it and do as it says on the pack lol and let it to dry ,as long as its not broken 3 quarters the way round the wrap will work

Ok, well i have tomo off, so i figure if i start it up and get my bro to rev it i wil be able to see where its blowing?

you can do this yourself by popping your palm briefly over the end of the zaust.... if its blowing/leaking you'll soon see where