Wiring Loom help needed please!!

[rubjonny]

no the driver only has the wiring for the level sender.  the loom runs along the inner sill then out to the boot area
You can pull out all your old pump loom, only issue is you'll need to find some CE2 pins to fit into the pump plug, have a look at my fusebox faq and it'll show you where.

[mattp1983]

Cheers mate, have all your guide printed out, was a godsend labelling up the VR engine and clock looms ready for connection.

So looking at your guide the fuel pump plugs into position M with it sharing a plug with the fuel level sender and sunroof map reading light apparently..... Presumably my Driver loom will have two out of these 4 positions used in the multi plug so if I get a VAG wire repair kit then  simply plug my existing wires into the correct positions on that plug?

 

[rubjonny]

yep thats right, though personally I'd chop a few plugs out of a MK3 in the scrappy and use that insted 

[VeeDubGTI16v]

rubjonny, do you have the details about how to splice the idle controller into the interior loom? im putting a 16v into a 85 kjet 8v by the way if it makes a difference.

[rubjonny]

i gots diagrams, pm me your email address