Author Topic: Golf Cl problems intermittent problem with idle revs  (Read 1251 times)

Offline golf_18

  • Just got here
  • *
  • Posts: 1
Golf Cl problems intermittent problem with idle revs
« on: 29 December 2007, 19:27 »
Hey everyone,

This is my first post on this forum and I'd really appreciate some help!

I've been driving my first golf, an M reg golf 1.8 Cl for just over 2 months now and i've had intermittent problems with the idle revs. 80% of the time it's happy staying at 900 rpm, but every now and then it will rise up to as high as 3000 rpm on its own.

The times that it has stayed at these high revolutions i've been able to adjust the pin on the throttle linkage to compensate for the increase and this brings it down to 900 revs in neutral and in gear.

Is it possible that the choke needs a clean/lubrication/replacing?

Any help would be greatly appreciated!

Thanks!

Offline saul79

  • I live here
  • *****
  • Posts: 1,154
Re: Golf Cl problems intermittent problem with idle revs
« Reply #1 on: 30 December 2007, 18:47 »
idle stabelizer valve on the front of spi unit

mk3 golf 1.8t ,280mm front brakes rear disc conversion,coillies.

Offline LostBok

  • Here all the time
  • ****
  • Posts: 346
Re: Golf Cl problems intermittent problem with idle revs
« Reply #2 on: 31 December 2007, 16:06 »
a friend had a similar prob (that he solved, eventually) - I'll see if I can pick his brains on the subject if you're still having problems.
LOSTBOK
Audi A4(B6): 2.5TDi Quattro Sport: Factory fitted Xenons, BOSE, and full sports leather "Soul Black / Titanium".
Mods: All OEM: S-Line bodykit, RNS-E, Bluetooth, Audi R8 FBMFSW, SDS-High voice control, full DIS, cruise control, Aero wiper mod.
In progress: 5 x OEM S4/Ronal 'Avus' 18's & 235/45ZR18 Toyo Proxes T1-R (bah! wheels delayed until WC 27-JUL-09)
Researching: Colour DIS, Freeview and DAB tuner with iPodvid/PSP/AV in for the RNS-E.

Offline match

  • Not said much yet
  • **
  • Posts: 72
Re: Golf Cl problems intermittent problem with idle revs
« Reply #3 on: 07 August 2009, 20:28 »
idle stabelizer valve on the front of spi unit
mate where is this located i have the same fault.