« previous next »
Pages: [1]

Author Topic: springy hose clamps  (Read 1375 times)

Offline jammac

  • I live here
  • *****
  • Posts: 503
springy hose clamps
« on: 07 December 2007, 20:29 »
I F*@KIN HATE THESE!!!!!

having had afew issues with knackered coolant pipes im going to halfords tomoz to get a full cars worth of jubilees clips to go with my new pipes as im getting abit pissed with spending as much time getting these little twits on/off as whatever job it is i want to do.

 :cool:
Logged

ITS A TRAP!

Offline takethefifth

  • I live here
  • *****
  • Posts: 1,034
Re: springy hose clamps
« Reply #1 on: 07 December 2007, 20:39 »
 :grin: I just use either pliers or mole grips to compress them, then slide the clip into the most convenient place to hold it - either further down the pipe or on the joint. Then recompress and slide it back into place when you're finished.

After a bit of practice it's easy now and i even find them less hassle than trying to get a screwdriver into an obscured jubilee clip.
Logged

Offline nealey

  • I live here
  • *****
  • Posts: 1,062
Re: springy hose clamps
« Reply #2 on: 07 December 2007, 21:22 »
i bought some stupidly expensive pliers escpecially for them clips!

Saves so much time though, can have them off and out the way in seconds
Logged

Offline jammac

  • I live here
  • *****
  • Posts: 503
Re: springy hose clamps
« Reply #3 on: 08 December 2007, 08:59 »
ive bought a complete set of new hoses so im gonna change the whole lot. there are some right gits to get at with pliers, mole grips, swannose pliers etc so once their off a jubilee clip is going back in its place!
Logged

ITS A TRAP!

Offline JC

  • 10k hero
  • *
  • Posts: 13,429
  • Back in the North.
Re: springy hose clamps
« Reply #4 on: 08 December 2007, 09:02 »
tie wraps - its the way ahead  :grin: :laugh:
Logged

Offline jammac

  • I live here
  • *****
  • Posts: 503
Re: springy hose clamps
« Reply #5 on: 08 December 2007, 09:10 »
HAHA tried that! didnt work
Logged

ITS A TRAP!

Offline mattkh

  • I live here
  • *****
  • Posts: 554
Re: springy hose clamps
« Reply #6 on: 08 December 2007, 22:28 »
Quote from: nealey on 07 December 2007, 21:22
i bought some stupidly expensive pliers escpecially for them clips!
Hi
What technique do you use to ease the old hoses off. I cant shift my heater hoses. Also can you put up a picture of the special pliers. Cheers.
Logged

Offline Dolly

  • I live here
  • *****
  • Posts: 721
Re: springy hose clamps
« Reply #7 on: 08 December 2007, 23:02 »
a flat blade screwdriver, nothing too sharpe, ease under the pipe and work around it... a little persuasion should see it off... id upgrade samco style then it doesnt matter if you damage one lol
Logged

Offline golf8v

  • GTI forum regular
  • ***
  • Posts: 200
Re: springy hose clamps
« Reply #8 on: 09 December 2007, 08:23 »
Logged

Offline nealey

  • I live here
  • *****
  • Posts: 1,062
Re: springy hose clamps
« Reply #9 on: 09 December 2007, 11:05 »
Logged
Pages: [1]
« previous next »