Ok first off , turned up this morning at a local retail park to find another ED30.
white DSG with rear parking camera in the number plate .
Sweet car and couldnt resist a sad ED30 pic ..........

anyway onto the real story...
Small 3/4 sized front number plate bought from
www.fancyplates.comProceeded to remove my existing plate
(which was easy as I had made the dealer stick them on)
At which point I realise theres a problem......
a) Theres a plinth !
b) There are 4 big fixings holding the plinth on!
c) the fixings are blind ended
(the ones where you need to punch the middle out to release them)
undaunted I wanted the plinth off as its grey and not black.
(wish I had told dealer to not put front plate on at all

)
Try as I might I couldnt get those f***ing clips to release !!!
In the end I had to resort to drilling the centres out (thats 4 new clips on order now LOL)
Car 4 days old and ive got the drill out ......

Anyway , long story short the plate is on , no plinth , and 4 damn great holes.
I like it , but need a good solution to plug the holes , on a black car its certainly hidden.
I have enhanced the contrast on the second pic so you can see one of the holes
(to left of no. plate)
Heres the std plate and 3/4 plate in comparison.


Heres a possible (but expensive solution)
www.bumperplugs.comi have seen some useful possibilities in B&Q

obviously its a compromise , but for a small plate I'm willing to see past the 'plugs' lol
Its a personal choice which Im sure many of you wont like!
oh and no its not legal , but I do run a normal rear plate.
Car now at 170 miles and running great.
JohnO
JohnO