« previous next »
Pages: [1]

Author Topic: any one know of.......  (Read 1222 times)

Offline kniterider

  • I live here
  • *****
  • Posts: 1,857
  • had most, sold most and often buy more!
any one know of.......
« on: 28 August 2006, 14:53 »
a link for an online bentley manaul or similar for the mk3 golf??? i need to have a look at an exploded diagram of the vr6's heater matrix/fan box etc... as who ever fitted the air con when the replacement engine was fitted hasnt connected the cable for the cold/hot manaul control, the cables there and its connected to the knob but nothting there to connect it to.... went to put the heater ontoday and it didnt work.... air con works a treat though... think theres a pully/lever thing that fits in a hole on the underside, i can stick me finger in and the shafts there that controls the flap inside :tongue:
Logged

Offline rubjonny

  • 10k hero
  • *
  • Posts: 16,349
  • Hello, my name is John and I'm a dub addict.
Re: any one know of.......
« Reply #1 on: 30 August 2006, 09:11 »
I havn't found one, I think you're just going to have to buy a haynes ;)
Get on ebay, we got one for our MK1 for 99p :)
Logged
Hello my name is John and I'm a dub addict.

Offline SAD VR6

  • Not said much yet
  • **
  • Posts: 68
Re: any one know of.......
« Reply #2 on: 30 August 2006, 09:14 »
If you send me your address you can have mine, copy it then send it back if you want.
Logged
THE FIRST GUY TO MILK A COW, WHAT THE F*$K WAS HE DOING??????

Offline V_Arse6

  • GTI forum regular
  • ***
  • Posts: 164
Re: any one know of.......
« Reply #3 on: 30 August 2006, 12:15 »
I have a PDF version which is all scanned in.  I'd email it to you but it's over 30Mb.  If you had a site I could upload it to or something I'd give that a go though.

Had a few pages removed I think, since the guy who scanned it obviously had a VR6 and wasn't all that interested in some of the other bits, but it's still something like 500 pages.  Very useful I've found.

Got it off Ebay for a couple of quid I think. :smiley:
Logged

'95 Mk3 VR6
FK Highsports, Crystal Clear Fogs/Indicators/Repeaters, Mk4 Style Headlights, PiperX induction, Bonnet lifters. (Need to update pic for new headlights)

Offline AudiA8Quattro

  • Forum addict
  • *
  • Posts: 4,776
Re: any one know of.......
« Reply #4 on: 30 August 2006, 12:22 »
The wiring diagram should be the same for the 8 and 16v with aircon, which is covered by Haynes.
Logged
FOR DIY GUIDES GO TO <br>www.volkswagenaudi.co.uk<br/>BRAKES, SUSPENSION, CV JOINTS

Offline SAD VR6

  • Not said much yet
  • **
  • Posts: 68
Re: any one know of.......
« Reply #5 on: 30 August 2006, 17:51 »
Got mine off Ebay, Takes ages to find what you want :angry:
Logged
THE FIRST GUY TO MILK A COW, WHAT THE F*$K WAS HE DOING??????

Offline kniterider

  • I live here
  • *****
  • Posts: 1,857
  • had most, sold most and often buy more!
Re: any one know of.......
« Reply #6 on: 30 August 2006, 21:52 »
yeah my email addy is kidrocc@easy.com you can try and mail it??? i havent got a site or owt to upload it too... :cry:

got the 'arm' which controls the airflow direction either through the matrix or bypasses it from one of hardcores donor cars today but still a bit missing, so snapped off the collor around the base of the bush area which controls the flap, can know feel the shaft and tried to make some thing and glue it on, worked for a bit then fell off... so ill gonna get the guys at work to turn me up a polyurathere bush to clamp on the shaft then fit the arm to, then connect the cable and wahey.... till then i super glues a raw plug on it and manually turned it to warm... worked a treat.. other than just left the skatepark after a few hours bmx'in and last thing i need on the way home is the heater on... so some fumblin in the dark and i flipped the flap over so i could have the air con on..... ebay bargins.. dont you just luv em  :wink:
Logged
Pages: [1]
« previous next »