Author Topic: Breather hose....  (Read 2621 times)

Veedubgt18v

  • Guest
Breather hose....
« on: 29 December 2003, 17:27 »
Where this goes into the rocker cover, the bit that goes inside has broken away so the pipe just sits on the hole, it is quite tight but wondered if this is something i should sort asap or can it wait for a couple of weeks?

Blue MK2

  • Guest
Re:Breather hose....
« Reply #1 on: 29 December 2003, 18:08 »
Mine was worn, get a replacement from VW its only about 89p.

When you replace it remember to pull the other half out of the rocker cover ;)

Veedubgt18v

  • Guest
Re:Breather hose....
« Reply #2 on: 29 December 2003, 18:10 »
yeah its behind that gauze thing

im gonna get it chromed anyway!

is it gonna do damage if i dont fix it sraight away?

Blue MK2

  • Guest
Re:Breather hose....
« Reply #3 on: 29 December 2003, 18:13 »
naa doubt it. mine was like that for 3 months.lol

so your getting it chromed hey? 8) Did you ring that engine candy place?

Veedubgt18v

  • Guest
Re:Breather hose....
« Reply #4 on: 29 December 2003, 18:17 »
nah i emailed them, they havent replied yet.
its just that a mate of mine is gonna steam clean the engine so i thought i would go for some bling, rocker cover, cam cover maybe some other bits

there is a rocker cover for sale on ebay but i cant be arsed to bid to be honest

http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=2451393932&category=9889&rd=1

Offline richandhazel

  • Global Moderator
  • Forum addict
  • *****
  • Posts: 4,462
Re:Breather hose....
« Reply #5 on: 29 December 2003, 19:11 »
nah i emailed them, they havent replied yet.
its just that a mate of mine is gonna steam clean the engine so i thought i would go for some bling, rocker cover, cam cover maybe some other bits

there is a rocker cover for sale on ebay but i cant be arsed to bid to be honest

http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=2451393932&category=9889&rd=1

I was just going to mention that one on ebay............ ;)

Veedubgt18v

  • Guest
Re:Breather hose....
« Reply #6 on: 30 December 2003, 16:42 »
blue, start your engine then disconnect the breather hose, listen to the engine then re-connect it. man what a difference! my engine ran sh!te without it connected! also i had a vacuum hose lose and my temperature sender wasnt working properly. may explain my weird dropping revs thing.....