Author Topic: mk2 vr6 conversion (gathering parts) coilover question (Read 1293 times)

GolfGTiMk216LoveIT · « **on:** 06 January 2006, 17:35 »

i know i hjave to get vr6 corrado coilovers but what make should i go for im in the dark here so need help

Judderi · « **Reply #1 on:** 09 January 2006, 08:54 »

It all depends upon your budget mate. You can get a cheap set of FK's or alike or go for the big bucks with a set of KONI's. Its up to you.

Logie · « **Reply #2 on:** 11 January 2006, 16:58 »

Is the suspension needed to cope with the added wait of the engine? I already have uprated shocks and Ei Bach 40mm springs?

Judderi · « **Reply #3 on:** 11 January 2006, 16:59 »

I would of said yes as you will need stiffer springs.

Agreeable Slick · « **Reply #4 on:** 11 January 2006, 17:31 »

can't see why, none of the mk3s came with coilovers as standard, just make sure that the shocks and springs are all ok.

...joe · « **Reply #5 on:** 12 January 2006, 00:26 »

you don't need coilovers but you do need extra poundage springs as the vr is alot heavier than the standard mk2 engine.

Judderi · « **Reply #6 on:** 12 January 2006, 09:09 »

Thats what i said/meant i think

GolfGTIforum.co.uk