« previous next »
Pages: [1]

Author Topic: Custom Spigot Rings  (Read 1993 times)

Offline davidhawkins_78

  • I live here
  • *****
  • Posts: 905
  • Valver Bad Boy
Custom Spigot Rings
« on: 06 November 2003, 14:27 »
Can anyone recomment someone to help with this as the alloys I have have been direct drilled for a specific fitment!!

Any help would be great ....
Logged


'89 Monza Blue Valver
to quote a VW engineer, "the Mk1 was the prototype, the Mk2, the real thing!"

Offline Gambit

  • Forum addict
  • *
  • Posts: 4,354
Re:Custom Spigot Rings
« Reply #1 on: 06 November 2003, 15:01 »
do u mean you need adapters so the wheels fit  your hubs, or actual spigot rings to centre the wheels on the hub?
« Last Edit: 06 November 2003, 15:03 by Gambit »
Logged

Offline davidhawkins_78

  • I live here
  • *****
  • Posts: 905
  • Valver Bad Boy
Re:Custom Spigot Rings
« Reply #2 on: 06 November 2003, 15:07 »
I do actually need spigot rings to make sure the wheels are centralised on the hubs. The centre bore on the alloys has been drilled to be a specific fit and it slightly larger than the 57mm on a VW.(God knows what they where fitted to before ?!?!)

The wheels are the right PCD but I get some vibration at motorway speeds so wanna make sure they are spot on - if this is possble ofcourse !!!
Logged


'89 Monza Blue Valver
to quote a VW engineer, "the Mk1 was the prototype, the Mk2, the real thing!"

Offline Gambit

  • Forum addict
  • *
  • Posts: 4,354
Re:Custom Spigot Rings
« Reply #3 on: 06 November 2003, 16:06 »
thats tricky then, only thing i can suggest is you measure the centre bore of the alloy then go to a large alloys retailer and find an alloy that has the same centre bore then use the spigot rings for those alloys
Logged

Offline Dream Police

  • Not said much yet
  • **
  • Posts: 50
Re:Custom Spigot Rings
« Reply #4 on: 06 November 2003, 21:42 »
I had the same problem. Ive got a Mk II with OZ alloys from a Clio.
The centre bore of the wheels is 60mm. After trying about a zillion different places I got some spigot rings from R-Tec in Hatfield.
The phone number is 01727 790100
Logged
I voted for Pedro

Offline davidhawkins_78

  • I live here
  • *****
  • Posts: 905
  • Valver Bad Boy
Re:Custom Spigot Rings
« Reply #5 on: 07 November 2003, 09:31 »
Gooner you star !!!

I was just about to give up and stick the wheels on eBay too, gave them a call and they were very helpful - gonna take a drive up there tomorrow and they'll sort me out.

Thanks again !! ;)
Logged


'89 Monza Blue Valver
to quote a VW engineer, "the Mk1 was the prototype, the Mk2, the real thing!"
Pages: [1]
« previous next »