« previous next »
Pages: [1]

Author Topic: Lanoguard  (Read 253 times)

Offline Hampshire rubber burner

  • Just got here
  • *
  • Posts: 7
Lanoguard
« on: 14 September 2025, 17:31 »
Has anyone used lanoguard underside rust protection on there car yet
Logged

Offline Beebopper

  • GTI forum regular
  • ***
  • Posts: 105
Re: Lanoguard
« Reply #1 on: 14 September 2025, 17:42 »
Been thinking about it, the rear suspension arms always start looking iffy only after a short while on most cars now, really badly prepared for UK roads. Had some luck previously with Scottoiler FS365.
Logged
Prior - MK2 GTi Big Bumper in White
Current - MK8 GTi Clubsport in Moonstone Grey
(Plus Many other non-Golf hot-hatches in-between!)

Offline Ewankinch

  • Not said much yet
  • **
  • Posts: 10
Re: Lanoguard
« Reply #2 on: 14 September 2025, 19:00 »
I used Bilthamber dynax uc aerosol's. It's great stuff dries clear. I've coated the front and rear suspension and arms, all nuts and bolts underneath and any other metal parts that will rust apart from the exhaust obviously. I removed the front and rear wheel liners and waxed the inside of the wings and wing lips. I also removed the sponges that sit in the centre of the front wings as these cause rusting. My mk7 golf was rusty so I'm not taking any chances with my 8.5. I also used Bilthamber dynax s50 which is a cavity spray with a lance and coated the inner sills. The inner sills were coated with a clear wax from factory but I've given it some more. The Dynax uc will need to be applied annually to keep it topped up I used 2 tins. They're only about £20 a can.
Logged
Pages: [1]
« previous next »