Aftermarket steering wheel boss fitting indicator cancelling.

[BOILINGPOINT]

Hi folks
I recently bought a momo steering wheel boss for my mk3, I already had a steering wheel form a previous car.
On the back of the boss it has a bit sticking out to cancel the indicator. At what position does this want to be located when the wheels are pointing straight ahead.

Many thanks in advance.

[LR5V]

Hmmm, this doesnt sound like a genuine momo boss.
I tried a cheap ebay one, it didnt last 1/2 an hour as it just didnt cancel the indicator.
Genuine momo takes the clockspring plate off the original wheel and... it just works, unlike the

[BOILINGPOINT]

The back of the boss is basically the same as this one.

[LR5V]

Yes -thats the one I didnt get on with.
It will work, but if its like my one it wouldn't cancel
-I sent mine back, suspect its a Mk2 boss, same spline as on Mk3

You need to put the sticking out bit towards 3 o'clock
Hope it works for you

[BOILINGPOINT]

Thanks. The car had a mk3.5 steering wheel on it originally but that does t cancel the indicators either. On further inspection the plug for the air bag isn't there either. It must of had an aftermarket at some point earlier. I might try get a clock spring from a 3.5 and just use the 3.5 wheel, it does look good.