Kev's GTI PP DSG with OEM mods

[p3asa]

I've been using the ones from ebay but found the knurled end was scoring into the wheel nut hole on the alloy so had to wrap the ends with fabric tape.

[Eccie]

I also got another nice oem part. Audi's come with a plastic piece to guide the wheel onto the hub. You only get about 2 uses out of it until the plastic threads strip. This is an aluminium one from a Phaeton/Touareg. As it's aluminium, it's very light, it's far light than you would expect. If there's interest, I'll dig out the part number:


[/quote]

Kev - Can you post up the part number for the Phaeton/Touareg part please

[BigD]

Part No. 7L0012223

IIRC about 6 quid plus VAT from TPS

[Eccie]

Part No. 7L0012223

IIRC about 6 quid plus VAT from TPS

Top bloke - thanks

[kevinm]

BigD is spot on with the part number

[Bizmo]

Where do you get the connectors from to crimp onto the wires?

[kevinm]

Where do you get the connectors from to crimp onto the wires?

I get them from rs-online

[Bizmo]

Where do you get the connectors from to crimp onto the wires?

I get them from rs-online

Thanks how do you know which corresponds to which repair wire?

[Bungleaio]

This thread is a goldmine of information, I now want to get the jacking parts, wheel alignment tool and all the gubbins to install the lights to the doors.

Car hasn't been built yet and I'm already looking at bits to improve it 

[kevinm]

Where do you get the connectors from to crimp onto the wires?

I get them from rs-online

Thanks how do you know which corresponds to which repair wire?

Sorry I didnt see this. Let me know which repair wires you are referring to and I'll post links.