Original Rear Boot Spoiler Options

[mjb]

What rear boot spoiler options were there for the Mk3 and what are you running? - apologies if this has been a topic beore - I have searched but couldn't find anything!

[Foreveryoungaus16v]

Only ones I woukd consider is the US one with brake light, Votex with break light (all with the three fixing screws to the rear glass not bonded) painted VR ones and normal.

I made mistake of buying one where had to drill two holes in tailgate,  biggest mistake to date.

[mjb]

Yeah wouldnt consider anything other than OEM - was just interested in what was originaly available

Votex, Vr6 etc..... what about heckspoilers?.....are these really as rare as people are now making out?

[VW BUSH]

Only ones I woukd consider is the US one with brake light, Votex with break light (all with the three fixing screws to the rear glass not bonded) painted VR ones and normal.

I made mistake of buying one where had to drill two holes in tailgate,  biggest mistake to date.

Why what happened? Or was it just gash

[Foreveryoungaus16v]

Lol yeah it looked terrible,  pretty sure it was a Hella one too. Had to drill 2 holes either side of the tailgate and it just looked so out of place

[mjb]

Yeah that doesnt sound good at all

[Millhausen]

I have a brand new bond on Votex one still sitting in the box waiting to be installed once I get round to it. At the bottom of a long list though 

[Foreveryoungaus16v]

Hate the bond on sh!t. The three screws through window are the way to go

[Millhausen]

I'm guessing as you have nearly 1500 posts you know what you are talking about, but just in case you don't; you are aware that the screwed on ones are also bonded on?
The Votex one I have was a dealer option when the Mk3 came out.

[gasketface]

the original standard ones are screwed on and have a line of sealant on them to stop water seeping through and running down the rear screen,the sealant is a bit like Dum Dum.If you were to remove the nuts from the studs and drive around it would soon fall off.A properly bonded one will not do that and does'nt need screws at all.

I have a Heckspoiler and a Votex with brakelight (very heavy) and neither use screws.