Author Topic: Do I need one?  (Read 2461 times)

Offline benmanc

  • Here all the time
  • ****
  • Posts: 433
Do I need one?
« on: 19 June 2014, 07:52 »
I am fitting coilovers at weekend.

I bought some front top mounts and bearings.

Basically been told its best to replace those plus means I dont need a spring compressor then?

Do I need anything for the rears too? or any bolts for anything?

Offline Wayne

  • Sir Postalot
  • *
  • Posts: 32,051
Re: Do I need one?
« Reply #1 on: 19 June 2014, 10:53 »
New rear top mounts would be a good move

Offline Dizzie

  • Forum addict
  • *
  • Posts: 4,882
  • Make friends with your fast
Re: Do I need one?
« Reply #2 on: 19 June 2014, 12:32 »
might as well replace the rears since you can then just chuck the lot instead of farting around removing the old ones.

fronts are advisable since you're in there anyway. I've never beefed spring compressors when doing coil overs before. if you need to just wind down the collar til there's no tension anyway.
Mk4 Golf 150PD

Offline mcgee9t2

  • I live here
  • *****
  • Posts: 3,289
Re: Do I need one?
« Reply #3 on: 19 June 2014, 12:41 »
Dont need spring compressors unless your removing the front springs your removing the whole front suspension units.

rear springs can be more tricky to get out cause there still uner a little preassure, but just stick a bar in there and you can leaver them out easy enough.

Offline Dizzie

  • Forum addict
  • *
  • Posts: 4,882
  • Make friends with your fast
Re: Do I need one?
« Reply #4 on: 19 June 2014, 12:45 »
drop the beam down and those rear springs will just fall out...
Mk4 Golf 150PD

Offline benmanc

  • Here all the time
  • ****
  • Posts: 433
Re: Do I need one?
« Reply #5 on: 19 June 2014, 15:26 »
Not sure what I am looking for on ebay for rear top mounts I can use. Anybody have a link to ones I could use?

Offline 1.8Tgolf_Chris

  • Here all the time
  • ****
  • Posts: 263
  • Mk4 1.8t AUM
Re: Do I need one?
« Reply #6 on: 19 June 2014, 15:38 »
I just fitted new jom coilovers few weeks ago, hardest part was removing stock struts from the hub we had to use an air chisel to get them out
- I was told to re-use the STOCK inner slim strut nut which is much different to the one supplied, Unless your coilovers come with a slim one
that means taking ur stock spring off which is very easy but you need an air gun to do it my way
- even if you change the rear top mounts, ur still gotta remove the old ones because you need the bump stop and dust cover but it is simple

simple way to remove stock spring http://www.youtube.com/watch?v=3ikPsNtzHHo
« Last Edit: 19 June 2014, 15:40 by 1.8Tgolf_Chris »

Offline benmanc

  • Here all the time
  • ****
  • Posts: 433
Re: Do I need one?
« Reply #7 on: 19 June 2014, 16:13 »
f**k this. Its getting more complicated the more I look at it!

Dont have an air gun

Offline 1.8Tgolf_Chris

  • Here all the time
  • ****
  • Posts: 263
  • Mk4 1.8t AUM
Re: Do I need one?
« Reply #8 on: 19 June 2014, 16:31 »
f**k this. Its getting more complicated the more I look at it!

Dont have an air gun

Hmm its possible without as many will probably tell you, but ill be honest i would not like to do that job without air tools id of been there all weekend

Offline benmanc

  • Here all the time
  • ****
  • Posts: 433
Re: Do I need one?
« Reply #9 on: 19 June 2014, 16:46 »
Tempted to just but the rear top mounts and let garage throw them on