Replica LED Projector Headlights

[golfhappy]

Bugger looks like i'm going to have a look at what check boxes are checked on byte 18. I'll look tomorrow when i've time. Thanks tho.

[golfhappy]

Byte 19 allows you to select which voltage you send to your headlights and tail lights. As an example 88 the first digit is for tail lights are 13v and the second digit 8 is headlights on 13v. So 88 is headlights and tails both set to 13v. To set the 2nd part of the byte code to 6 this would mean the headlights set to 12.8v. So tails 13v and headlights 12.8v. Mine set to FF states that headlights and tails set to "a fixed eeprom" can anybody shed any light on that....and forgive the joke!
Before anybody asks yeh i went back to the car to try and connect it back up and change byte 19 to either 88 or 86 but it wont connect with the module?

[golfhappy]

As the above post here's a link to my auto scan on VWgolf.net.au you can see from the fault code that it registers 14.10v...so by changing byte 19 to me thinks 86 that may clear that fault. I'm waiting for the VCDS cable i ordered today so i can change the code!

[JayGTD]

As the above post here's a link to my auto scan on VWgolf.net.au you can see from the fault code that it registers 14.10v...so by changing byte 19 to me thinks 86 that may clear that fault. I'm waiting for the VCDS cable i ordered today so i can change the code!

Do you know if the version 12.12 cracked/none genuine cables you can crab off amazon for maybe £30 work? I know you have to disconnect off te Internet to prevent it from updating 

Jay

[golfhappy]

Did work, people had it on loan and it came back didn't work straight away but stuck it into the other USB and worked then when i decided to go and change byte 19 for reasons above it wouldn't work again. I ordered VCDS from Gedan last night at 16:50 emailed about half an hour later and it'll be here say about 10 o clock. Some service!Swansea to the Scottish Borders in 12 hours from ordering.

[golfhappy]

VCDS came yesterday and tried byte 19 at 86, thats headlights with 12.8v going to them still threw an error, changed again to 88 with 13v now going to the headlights and...wait for it no errors. WHOO HOO.

[JayGTD]

Congrats! That's good to hear. Mind if I borrow the cable? :p I wanna try out some fancy tweaks like gauge sweep

Jay

[Dipesh2031]

I would be ALL over these if the LED's didn't have a 6000k led colour temp 

[JayGTD]

I would be ALL over these if the LED's didn't have a 6000k led colour temp 

I prefer this colour to OEM's 4300k :p i think Audi OEM DRL LED's run around 5000-6000k too

[AndyWard]

What is the overall fitment like of the unit as a whole, any gaps ??