can any one tell me the best way to thread the vack hose from engine bay to boos

[adriangtiturbo]

really need some help to find the best way to thread the vac hose from my engine bay to the boost guage in car. carnt find a hole any where.

[brewey]

There's a few ways use the bonnet release grommet on the drivers side, or there is the from it behind the glovebox/ pollen filter.

Have a search there's loads of threads on how to fit one. Just remember whatever hole you use it needs sealing!!

[Wayne]

Be carefull with the bonnet cable grommet it can leak afterwards.

[sharki786]

I did non of the above. I fed the hose from the pass side. If you look on the right hand side (pas side) of engine bay you will see a loom going into a rubber gromet. I used a metal wire clothes hanger to feed the cable through. Just be carefull not to pierce any wires or anything else.

[adriangtiturbo]

cheers for help but still struggling. think im getting thick as i get older.lol.

[WadGTI]

Run it up the side of the windscreen and leave the drivers window open slightly 

[1.8Tgolf_Chris]

Run it up the side of the windscreen and leave the drivers window open slightly 

+1 yolo

[adriangtiturbo]

Run it up the side of the windscreen and leave the drivers window open slightly 

did think about doing that