bad brakes

[Screech16v]

All the nipples are pointing up, yes?

This could be funny

Sharki you havnt answered this question,have you got the calipers on the correct sides? nips up?

[sharki786]

All the nipples are pointing up, yes?

This could be funny

Sharki you havnt answered this question,have you got the calipers on the correct sides? nips up?

Sorry screech mate, ye they are pointing up. U could put them wrong side but the hand brake cable gets funny to put on.

Well tried with the eezibleed. No luck. The pedal is soft 3/4 way down and then bites before it goes to the bottom and if i push anymore then its the end of the travel. Well i was speaking with mad4vws and he has a few. Which make should i get if i buy a new one? I could buy a refurb kit from bigg red and replace the worn seals?

[Screech16v]

Just get a good working secondhand one off mad 

[sharki786]

Just get a good working secondhand one off mad 

How can i check to see if the servo is ok and not loosing pressure??
Could the 16v & vr owners tell me where the pipe comes from for the hydro clutch? Is it the clear bottle, were you put the brake fluid in?

[sharki786]

P.s what size is the piston is it 23mm? And which has the largest piston on the mk3?

[Screech16v]

Pipe comes off the side of the brake res for the hydro clutch,biggest master cylinder will be the later 96 onwards with 288 brakes

[tweed]

Pipe comes off the side of the brake res for the hydro clutch,biggest master cylinder will be the later 96 onwards with 288 brakes

Its fitted to all 16v and vr6.
I had 280mm brakes on my 95 abf but had the big master cylinder. 

[sharki786]

Just thinking about replacing the master cylinder. But i am VERY close in buying a vr6 and dumping that in there thats why i asked were the pipe comes off for the clutch