thanks to anilberke for the latest tweak, BTW we already have the turn signal trick (see point 9 of the list)
anyway, here is latest consolidation :-
1. Amount of fuel (in Gallons) used since the last fill up
Select [17] Instruments
Long Coding - (Function 07)
Go to Byte 10
Enable bit 4
2. [09] Central Electronics Menus is password locked
Go into Function 16 (Permissions)
Enter the code 31347.
3. Disable Seatbelt Warning
Go to [17] Instruments
Adaptation Channels -> function 10
Select disable seatbelt warning (Gurtwarner deaktivieren)
change to "yes" (default: none)
4. Setting Fog as Coming/Leaving Home
Go to [09] Central Electronics
Go to Security Access and enter 31347
Look for the German text under "Comfort-Illumination"
Set the new value drop down to "Fog Light"
5. Display the battery charge level or SOC (state of Charge)
Enter [17] Instruments
Go to adaptation channels, (no need for a security log in with this module)
Scroll down until you see Battery Charge (it's condition on mine was set to "TBD") > simply change it in the new value drop down to "active" and it's done.
Usage
Switch the ignition off, then press (and continue to hold) the trip reset button in the middle lower of the instrument panel. It will cycle from first resetting the trip to 0 miles > show "Time" to allow you to change the clock > then keep holding until say "Battery".
Release the button and display SOC for a few seconds before returning back to the main screen.
6. Automatic rain closing
Go to [09] Central Electronics
Go to Secuity Access and enter 31347
Go to adaptation channels and set the following:
- (15) Access Control 2 - Regenschliessen_ein aus (Rain Closing on / off) - Select Active
- (16) Access Control 2 - Regenschliessen_art (Rain closing Type) set to Permanent
- (28) Access Control 2 - Menuesteuerung Regenschliessen (Menu Control Rain close) – Set to Active (enables the menu in the ifotainment screen)
7. Alarm beep on lock / unlock
[09] Central Electronics
Go to Secuity Access and enter 31347
Adaptation channels, and you are looking for:
(1)-Acknowledgement Signals -Akustische Rueckmeldung entriegen (un-lock acoustic feedback)
(2)-Acknowledgement Signals -Akustische Rueckmeldung verriegeln (lock acoustic feedback)
Set one or both to on if you wish.
Then set the following to "on"
(7)-Acknowledgement Signals -Menuesteuerung akustische Rueckmeldung (Acoustic lock menu)
This enables a menu setting in the "car" settings, "Locking" menu of the infotainment screen to set alarm chirp on or off when locking /unlocking the car and have the option to switch it on or off from the head unit.
8. Gauge sweep
Go to [17] Instrument
Coding -> Function 10
Byte 1
Enable bit 0
9. Turn Signal adjustment
Go into [09] Central electronic
Go to Secuity Access and enter 31347
Go into Adaptation
Select (2) - Turn Signal Controls-Komfortblinken Blinkzykien
Type 5 in New Value (Default is 3)
10. Puddle lights on while folding/unfolding
Go into [42] Door control module
Coding Byte 1, Bit 5 (untick).
11. XDS Adaptation
Go into [03] ABS
Go into Adaptation & select “Expanded electronic differential lock”
New value to select > “Standard”, “Not activated”, “Weak”, “Medium”, “Strong”
12. Headlight washer frequency
To extend the interval cycles that the headlight washers will activate to a) prevent the front of your clean car being sprayed, and b) to reduce the amount of screen wash usage.
1. Go to [09] Central Electronics
2. STG access permissions -> Function 16
3. Enter access code 31347
4. Go to adaptation channels (Function 10)
5. Select channel 1 - Select "Number of operations front windsceen wiper washer per SRA activation" (in German - Frontscheibenwischer Anzahl Betätigungen Frontwaschanlage pro SRA Aktivierung auswählen)
6. Adjust value to preference (no of times you can operate the windscreen washer stalk before the headlight washer activate).
7. Select channel 3, and adjust the activate time for folding the switch to enable headlight washers in the first place.
13. Disabled bulb out warning for the led licence plate lamps.
Select STG 09 (wiring)
STG access permissions -> Function 16
Enter Unlock Code 31347
STG adjustment -> function 10
(1) Select Leuchte25KZL HA59-load type 25
Customize LED general - value at 43
(6) Leuchte25KZL HA59 dimming AB-25 Select
Adjust value to 127
After that remove key from ignition and re open car.