« previous next »
Pages: [1]

Author Topic: Blown hose :-(  (Read 2438 times)

Offline shiloh

  • Not said much yet
  • **
  • Posts: 44
Blown hose :-(
« on: 27 September 2013, 14:02 »
Hi everyone. I need some help. I have a split in this hose  :sick:. Does anyone know what its called the Y shaped one at the front, what it does and where I can get another one? The car is a 150AUM gti with revo. Also would it be easy for me to fix bearing in mind I am a complete novice where it comes to fixing cars  :embarrassed:. If not is expensive to get a garage to do. Still on a student budget at the moment  :whistle:

Logged

Offline paulhgti

  • GTI forum regular
  • ***
  • Posts: 226
  • GOLF 1.8T AUM 209bhp 228LB FT TORQUE
Re: Blown hose :-(
« Reply #1 on: 27 September 2013, 17:25 »
Try creation motorsport i got mine from there not very expensive
Logged

AUM 209 BHP R-TECH STAGE 1 RE MAP,MILTEK CAT BACK 4MOTION EXHAUST,4MOTION VALANCES,PIPERCROSS FILTER,TINTS,WIND DEFLECTORS,BOOST LEAK,SANTA MONICA ALLOYS,35mm H&R LOWERING SPRINGS

Offline Jin_C

  • GTI forum regular
  • ***
  • Posts: 113
Re: Blown hose :-(
« Reply #2 on: 27 September 2013, 17:26 »
Its called the crankcase breather hose. You have 3 options

1. Replace with OEM from dealer/TPS
2. Upgrade to silicon part that wont perish or split
3. Replace the entire breather hose system with a catch can and pipes that wont split perish

Here is a link to option 2

http://www.ebay.co.uk/itm/SKODA-OCTAVIA-VRS-1-8T-20V-180-BHP-SILCONE-CRANKCASE-BREATHER-HOSE-AUM-AUQ-/160808939469?pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item2570f5afcd

Read this link for full details http://uk-mkivs.net/forums/p/295266/1960228.aspx

You will need jubilee clips when replacing as the ones you have there will have to be levered off and will be too hard to get back on.
Logged
1.8T AGU, K03s, 007p, pipercross panel filter, G60 + VR6 clutch and flywheel, silicone TIP, decat + boost hoses, JOM coilovers

Offline shiloh

  • Not said much yet
  • **
  • Posts: 44
Re: Blown hose :-(
« Reply #3 on: 28 September 2013, 13:21 »
Awesome thanks guys :smiley: will I need to make any mods to anything to fit that silicone one or is it a straight fit? Will it be ok to run my car in the meantime while I wait for parts?
Logged

Offline Jin_C

  • GTI forum regular
  • ***
  • Posts: 113
Re: Blown hose :-(
« Reply #4 on: 28 September 2013, 13:37 »
No mods, direct replacement. You may have to trim the ends to make it fit properly but I doubt it.

It is OK to drive but it wont be smooth and will be down on power and economy
Logged
1.8T AGU, K03s, 007p, pipercross panel filter, G60 + VR6 clutch and flywheel, silicone TIP, decat + boost hoses, JOM coilovers

Offline shiloh

  • Not said much yet
  • **
  • Posts: 44
Re: Blown hose :-(
« Reply #5 on: 28 September 2013, 13:59 »
Do you know what size and where I can the jubilee clips from?
Logged

Offline paulhgti

  • GTI forum regular
  • ***
  • Posts: 226
  • GOLF 1.8T AUM 209bhp 228LB FT TORQUE
Re: Blown hose :-(
« Reply #6 on: 28 September 2013, 20:21 »
Might be worth getting the hose no 2 on the diagram when i changed mine it was so brittle it fell appart.dont know what size clips you need jam sport sorted me out with some
Logged

AUM 209 BHP R-TECH STAGE 1 RE MAP,MILTEK CAT BACK 4MOTION EXHAUST,4MOTION VALANCES,PIPERCROSS FILTER,TINTS,WIND DEFLECTORS,BOOST LEAK,SANTA MONICA ALLOYS,35mm H&R LOWERING SPRINGS

Offline northeast_gti-t

  • Serious forum addict
  • *
  • Posts: 6,554
  • "1.8T AGU"
Re: Blown hose :-(
« Reply #7 on: 28 September 2013, 22:27 »
Common issue with the mkiv aum due to age and the oil vapour passing through over a period of time the rubber breaks down and as you have noticed results in a hole or split

as said really creation,dealer or tps or the best way as previously suggested bin the lot and fit a catch can system :afro: :wink:
Logged
2000 Mkiv GTi 1.8T AGU

Offline shiloh

  • Not said much yet
  • **
  • Posts: 44
Re: Blown hose :-(
« Reply #8 on: 30 September 2013, 18:00 »
Awesome thanks guys, Currently duct taped the thing up right now  :whistle:, just going to fit a new silicon hose and maby go for a catch can in the future  :smiley:
Logged
Pages: [1]
« previous next »