What have you done to your MK 7 today ?

[SuperScaff]

Just a photo for reference, but will do a bit of a review on them later down the line.

Looking very nice 

[Adam T7]

Just a photo for reference, but will do a bit of a review on them later down the line.

Looks 😎 What wheels are fitted?

[Watts]

Looks really good

[willni]

Looks 😎 What wheels are fitted?

BBS CI-R's 19inch et44 and 8.5J, 235/35R19 PS4S'

[Rudedog]

Gave my car its regular wash and I have to say that I'm mighty impressed with the way the ceramic pads have preformed with the smallest amount of dust they produce - very slight whitish dust that comes off with minimum effort - just wish I could justify changing the nearly new rears to the same ceramic pads plus getting rid of my rusty looking hubs on the rear discs - only surface brown but they catch my eye now the fronts look so good - toss up between the cost of new Zimmermann discs or the cheaper but more fiddly option of removing and painting.

[joe6]

I manage to do my disc hubs in-situ. Take care with the spray can and have a paper towel handy to remove overspray. Ceramic pads look like a good move when replacing. Do you notice any difference in pedal braking pressure?

[Rudedog]

I thought they felt better at the final bit of pedal travel but that could just be because they were new - certainly not worse - I did it mainly for the low dust but now I've read about ceramic pads then they do seem a good option over the standard - main are Ate pads.

I did want to take the discs so I could give the hub/calliper/splash plate a good clean plus touch-up any corrosion but with the weather changing I probably will do the quickest option just to make then look slightly better.

[jcrollie]

Went back home, managed to give the TCR a deep clean after 7 weeks. Looked fantastic for a few days... Just made it back up to Scotland, picked up a friend from the train station and now plastered with grime again 

[joe6]

I thought they felt better at the final bit of pedal travel but that could just be because they were new - certainly not worse - I did it mainly for the low dust but now I've read about ceramic pads then they do seem a good option over the standard - main are Ate pads.

I did want to take the discs so I could give the hub/calliper/splash plate a good clean plus touch-up any corrosion but with the weather changing I probably will do the quickest option just to make then look slightly better.

Thanks for the feedback. Front pads due for a change shortly.

[Watts]

Went back home, managed to give the TCR a deep clean after 7 weeks. Looked fantastic for a few days... Just made it back up to Scotland, picked up a friend from the train station and now plastered with grime again 

It looked great!