« previous next »
Pages: [1]

Author Topic: Front mount data  (Read 1184 times)

Offline asboGTI

  • I live here
  • *****
  • Posts: 678
Front mount data
« on: 16 April 2013, 19:41 »
has anyone got any data for there frotn mounts i know Rio has but i am after:

inlet temps
Core size
pipping size
any pressure dropping issues
any heat soaking issues

trying to find a a FMIC for mine but trying to do it without losing my aircon for the stealthy look.
Logged
vw golf mk4 ARZ 1.8T pipercross panel filter, xenon headlights, JOMS coilovers, forge 007p with green spring, audi tt anti roll bar, 3inch ebay trubo back exhaust, COOKIES MONSTER STICKER(adds bhp I swear)

Offline Dalo Harkin

  • I live here
  • *****
  • Posts: 2,070
Re: Front mount data
« Reply #1 on: 16 April 2013, 19:51 »
Me and Rio have practically the same setup, unless you plan to change the standard bumper, there ain't no way to hide them pipes
Logged
ARZ K03s, Oettinger Side Skirts, R32 front, Carbon stage 2, Forge 007p (yellow spring), Forge Actuator (yellow spring), Pipercross panel filter with DSG parts, N249 and N112 deleted, SAI deleted, Carbon canister deleted, Rear wiper deleted, Long Life turbo back custom exhaust with 200 cell sports cat, VR6/G60 clutch kit, Creation Motorsport TIP, Catch can, 'Wellycooler', K04 charge pipe, S3 ported inlet manifold - looks pretty standard on the outside though :)

Offline asboGTI

  • I live here
  • *****
  • Posts: 678
Re: Front mount data
« Reply #2 on: 16 April 2013, 20:02 »
i am changing to the R32 bumper and i have seen Rio's in person i like dont get me wrong but wanted it a little more hidden have you notice any pressure dorp problems with it?
Logged
vw golf mk4 ARZ 1.8T pipercross panel filter, xenon headlights, JOMS coilovers, forge 007p with green spring, audi tt anti roll bar, 3inch ebay trubo back exhaust, COOKIES MONSTER STICKER(adds bhp I swear)

Offline rio_gti

  • I live here
  • *****
  • Posts: 2,298
  • "i'm not spending any money on it" Got a Hybrid!
Re: Front mount data
« Reply #3 on: 16 April 2013, 20:30 »
I like to see you watch what you say about my bumper!!   :grin:

You'll have to go with forge or ths if you don't wanna be chopping... If you go with smaller inlet/outlets I don't think it will solve the issue because aswell as me cutting the recess back so the mesh sits forward (as far forward like standard) I still had to cut about 1" for the pipe....  So core inlets would have to be about 2" and that's not great... Min of 2.5" is wanted
Logged


2000 GTI 1.8t ARZ, S2000 filter, DSG intake, Forge 007 dv, Catch can, R-tech custom remap, 3" Supersize Silicone TIP, Powerflex dog bone, 'The Beast' FMIC, Ultimate delete, LCR fuel pump, 3" Turbo back, K03 hybrid, Ported Manifold, S3 injectors, 80mm maf = 280bhp 270lbft :evil:

Offline asboGTI

  • I live here
  • *****
  • Posts: 678
Re: Front mount data
« Reply #4 on: 16 April 2013, 20:35 »
thinking about that small it would get heat soaked way to easy with that small pipping cause the core would be tiny and i spending that kinda money on a small front mount just because of the name so looks like i will going eBay special then
Logged
vw golf mk4 ARZ 1.8T pipercross panel filter, xenon headlights, JOMS coilovers, forge 007p with green spring, audi tt anti roll bar, 3inch ebay trubo back exhaust, COOKIES MONSTER STICKER(adds bhp I swear)

Offline rio_gti

  • I live here
  • *****
  • Posts: 2,298
  • "i'm not spending any money on it" Got a Hybrid!
Re: Front mount data
« Reply #5 on: 16 April 2013, 20:39 »
Winner!!
Logged


2000 GTI 1.8t ARZ, S2000 filter, DSG intake, Forge 007 dv, Catch can, R-tech custom remap, 3" Supersize Silicone TIP, Powerflex dog bone, 'The Beast' FMIC, Ultimate delete, LCR fuel pump, 3" Turbo back, K03 hybrid, Ported Manifold, S3 injectors, 80mm maf = 280bhp 270lbft :evil:

Offline benny.banks

  • Not said much yet
  • **
  • Posts: 20
Re: Front mount data
« Reply #6 on: 17 April 2013, 08:49 »
the r32 front bumper still needs chopping even with the forge fmic.
Logged

Offline Dalo Harkin

  • I live here
  • *****
  • Posts: 2,070
Re: Front mount data
« Reply #7 on: 17 April 2013, 13:30 »
I think my setup is better, because I have the K04 charge pipe and inlet manifold (TB on passenger side)
waits for Rio's response  :tongue:

Logged
ARZ K03s, Oettinger Side Skirts, R32 front, Carbon stage 2, Forge 007p (yellow spring), Forge Actuator (yellow spring), Pipercross panel filter with DSG parts, N249 and N112 deleted, SAI deleted, Carbon canister deleted, Rear wiper deleted, Long Life turbo back custom exhaust with 200 cell sports cat, VR6/G60 clutch kit, Creation Motorsport TIP, Catch can, 'Wellycooler', K04 charge pipe, S3 ported inlet manifold - looks pretty standard on the outside though :)

Offline benny.banks

  • Not said much yet
  • **
  • Posts: 20
Re: Front mount data
« Reply #8 on: 17 April 2013, 13:39 »
im thinking of the ko4 charge pipe with on my AGU.
Logged
Pages: [1]
« previous next »