Replacing wishbone arm bushes.

[Pez]

I've got a feeling that my wishbone arm bushes are shot, when i press my brake at low speeds i can feel a noticeable  'play' feeling as if the arms are moving back. Can anyone recommend some new bushes and if anyone has a guide on replacing them then i would much appreciate it!  cheers Pez

[SI74]

Smaller of the two just go with standard, bigger one Audi TT/R32 bush. Search online for a how 2 as there's loads.

[Granta Gti]

Or put poly bushes in 

[Blackie20vt]

Or put poly bushes in 

Think I'm gonna go with the super pro poly set.

[Pez]

Just phoned a local parts shop, £25 each for complete new arms and bushes. Saves me struggling to get new bushes in and old out

[mar_k]

Just phoned a local parts shop, £25 each for complete new arms and bushes. Saves me struggling to get new bushes in and old out

Don't waste your money, Cheap arms = Cheap bushes, They won't last very long at all.
Especially if your car is lowered. Buy Cheap-Buy Twice.

Do it properly 1st time. Buy OEM arms with bushes, or go Poly.

[Wazzzer]

Use the new arms but not the bushes and just replace them with poly off the car so you don't potentially lose the use of it if anything goes wrong

[dom]

Use the new arms but not the bushes and just replace them with poly off the car so you don't potentially lose the use of it if anything goes wrong

This is by far the best solution.

[Granta Gti]

Use the new arms but not the bushes and just replace them with poly off the car so you don't potentially lose the use of it if anything goes wrong

This is by far the best solution.

+1