« previous next »
Pages: 1 [2] 3 4

Author Topic: POLISH AND PORTING THROTTLE BODY  (Read 5892 times)

Offline spikenipple

  • I live here
  • *****
  • Posts: 644
Re: POLISH AND PORTING THROTTLE BODY
« Reply #10 on: 27 March 2013, 15:34 »
If someone can provide a decent set of pictures showing before/after, I will happily port it out and polish it for you on my lathe.
Logged

Offline blueandy

  • GTI forum regular
  • ***
  • Posts: 106
Re: POLISH AND PORTING THROTTLE BODY
« Reply #11 on: 28 March 2013, 11:15 »
Logged

Offline spikenipple

  • I live here
  • *****
  • Posts: 644
Re: POLISH AND PORTING THROTTLE BODY
« Reply #12 on: 28 March 2013, 11:27 »
Cracking, fire us a PM then foreveryoungaus16v! If you send it my way, I'd appreciate it if you could measure the manifold port size so I can match them up, preferably with vernier calipers or something accurate  :smiley:
Logged

Offline Foreveryoungaus16v

  • I live here
  • *****
  • Posts: 1,370
Re: POLISH AND PORTING THROTTLE BODY
« Reply #13 on: 28 March 2013, 12:36 »
Sent you PM my friend :smiley:
Logged

KW V2, TEAM DYNAMICS PRO RACE 1.2, EIBACH ARBS, DS 2500 PADS, BLACK DIAMOND DISCS, LIGHTENED FLYWHEEL, CHIPPED ECU, VIBRA TECHNIC MOUNTS, JETEX DECAT,  FULLY POLYBUSHED
163 BHP (TSR POWER RUN)

VW BUSH

  • Guest
Re: POLISH AND PORTING THROTTLE BODY
« Reply #14 on: 28 March 2013, 19:53 »
On an 8v as you can only skim out so much on the lathe before it undercuts on the top side while you still have some step at the bottom.
By the time you have clocked it true on your face plate you could have dremmeled it :smiley:
Buy some Carbide burrs (not cheap) as they will cut it very cleanly and quickly and stay sharp for years if used on ali.
Dont drop them or press too hard as they will break.

http://www.ebay.co.uk/itm/10-Piece-Tungsten-Carbide-Burr-Set-3mm-3mm-shank-10-3x3-/360623128658?_trksid=p2047675.m1850&_trkparms=aid%3D222002%26algo%3DSIC.FIT%26ao%3D1%26asc%3D11%26meid%3D6568693252580083354%26pid%3D100011%26prg%3D1005%26rk%3D5%26sd%3D160968467775%26

If your up for making new vanes (Tricky) you can take it out a bit bigger and blend the step right out on a lathe :wink:
Logged

Offline Leroy

  • Here all the time
  • ****
  • Posts: 483
  • Golf GTI Anniversary 16v
Re: POLISH AND PORTING THROTTLE BODY
« Reply #15 on: 30 March 2013, 11:22 »
Quote from: spikenipple on 27 March 2013, 15:34
If someone can provide a decent set of pictures showing before/after, I will happily port it out and polish it for you on my lathe.

You could make a tidy profit doing these SpikeNipple, i want mine doing but haven't got the balls to do it myself!
Logged

Offline spikenipple

  • I live here
  • *****
  • Posts: 644
Re: POLISH AND PORTING THROTTLE BODY
« Reply #16 on: 30 March 2013, 11:30 »
If you need yours doing too then drop me a PM. I'll probably take mine off later and measure it all up so I can produce some definitive drawings  :wink:
Logged

Offline Leroy

  • Here all the time
  • ****
  • Posts: 483
  • Golf GTI Anniversary 16v
Re: POLISH AND PORTING THROTTLE BODY
« Reply #17 on: 30 March 2013, 11:39 »
I'll get a spare and get back to you, cheers buddy!!!
Logged

Offline murraymint

  • I live here
  • *****
  • Posts: 3,022
Re: POLISH AND PORTING THROTTLE BODY
« Reply #18 on: 30 March 2013, 12:48 »
I have a spare I wouldn't mind sending off to get done  :cool:
Logged
josh


95 Mk3 golf 1.6 CL, 96 Mk3 golf gti 16v, 89 Mk2 Jetta GL,  97 Mk3 golf gti 16v, 99 bora 2ltr se, 83 mk1 golf 1.1, 15 polo 1.2 tsi

Offline spikenipple

  • I live here
  • *****
  • Posts: 644
Re: POLISH AND PORTING THROTTLE BODY
« Reply #19 on: 30 March 2013, 13:57 »
Drop me a PM buddy!
Logged
Pages: 1 [2] 3 4
« previous next »