Author Topic: Mk4 golf TDi with R32 wheels (Read 1558 times)

maxmc2 · « **on:** 13 March 2013, 13:04 »

Hi guys

Getting some 18" mk4 R32 wheels to go on my MK4 TDi, just wanted to know how much should i be lowering by about 40mm??

TIA

sveed1.8T · « **Reply #1 on:** 13 March 2013, 13:35 »

For what though... stance or handling?

maxmc2 · « **Reply #2 on:** 13 March 2013, 13:50 »

Stance more than anything

Wayne · « **Reply #3 on:** 13 March 2013, 13:53 »

40mm will make it look a lot better.

dom · « **Reply #4 on:** 13 March 2013, 17:32 »

40mm will make it look a lot better.

Better, but won't look great.

Here is mine when it was on R32 wheels:

Coilovers all the way down on the rear and about 55mm front

DubAndDubber · « **Reply #5 on:** 13 March 2013, 19:26 »

These how much should I lower my car, shall I use coilovers or lowering springs and will my wheels rub threads are starting to irritate me!

maxmc2 · « **Reply #6 on:** 13 March 2013, 23:28 »

If i lower by 55mm will i have to do anything else to stop any rubbing or contact etc?

DubAndDubber · « **Reply #7 on:** 13 March 2013, 23:33 »

Dom, I shall leave this to you

EsSeX dAn · « **Reply #8 on:** 14 March 2013, 20:23 »

maxmc2, if you lower 55mm youll maybe start making the anti roll bar and drive getting cosy with each other

Hoggy · « **Reply #9 on:** 14 March 2013, 21:22 »

Anything over 40mm will probably result in rubbing. Just get an under driveshaft arb and you'll have no worries!

Do a search on here..you'll find loads of info.

GolfGTIforum.co.uk