« previous next »
Pages: [1]

Author Topic: remap from ava glasgow  (Read 1545 times)

Offline markgti1.8t

  • Here all the time
  • ****
  • Posts: 366
remap from ava glasgow
« on: 15 February 2013, 21:24 »
hi there has anybody in Scotland had a remap from ava tuning Glasgow looking to see if they are good   
Logged

AGU fk coilovers Powerflex top mounts full 3inch decat turbo back viper induction kit fmic vr6 clutch g60 flywheel catch can 007 forge dv Power flex wishbone bushes  Power flex dog mount under brace JOM  ADJUSTABLE Drop Links Walbro 255lph INLINE Fuel Pump wmi now fitted WAITING TO FIT VR6 MAF SAAB RED TOP INJECTORS STILL TO BUY K300 TURBO  CON RODS LSD

Offline davemk4

  • I live here
  • *****
  • Posts: 694
Re: remap from ava glasgow
« Reply #1 on: 15 February 2013, 21:27 »
didnt know he did golf. i had my primera set up and dynod there. he old skool in his ways the dyno runs in windows 95 lol but the guy defo knew his stuff. he dynod mine by 500rpm incriments holding it there at each point. on golf wise i dont know. didnt know he actually did mapping
Logged
2001 mk4 GTI 1.8t AUM. k&n induction kit with customer heat shield, 3'' TIP, Forge 007P, Stage 1 map, N249 bypass, 3'' downpipe and decat, 2.75'' Jetex cat back non res, Koni shockers and H&R springs 35mm, dimpled and grooved disks front and back

Offline barrym381

  • Forum addict
  • *
  • Posts: 5,934
Re: remap from ava glasgow
« Reply #2 on: 15 February 2013, 21:32 »
these guys they use revo stuff based in glasgow  :smiley:
https://www.facebook.com/KonzeptAutohaus
Logged

Offline davemk4

  • I live here
  • *****
  • Posts: 694
Re: remap from ava glasgow
« Reply #3 on: 15 February 2013, 21:35 »
Quote from: barrym381 on 15 February 2013, 21:32
these guys they use revo stuff based in glasgow  :smiley:
https://www.facebook.com/KonzeptAutohaus

thats handy as may be up this end some point this year............ :whistle:
Logged
2001 mk4 GTI 1.8t AUM. k&n induction kit with customer heat shield, 3'' TIP, Forge 007P, Stage 1 map, N249 bypass, 3'' downpipe and decat, 2.75'' Jetex cat back non res, Koni shockers and H&R springs 35mm, dimpled and grooved disks front and back

Offline barrym381

  • Forum addict
  • *
  • Posts: 5,934
Re: remap from ava glasgow
« Reply #4 on: 15 February 2013, 21:36 »
Quote from: davemk4 on 15 February 2013, 21:35
Quote from: barrym381 on 15 February 2013, 21:32
these guys they use revo stuff based in glasgow  :smiley:
https://www.facebook.com/KonzeptAutohaus

thats handy as may be up this end some point this year............ :whistle:
just a stone throw from my house an a few local lads are happy with them  :smiley:
Logged

Offline davemk4

  • I live here
  • *****
  • Posts: 694
Re: remap from ava glasgow
« Reply #5 on: 15 February 2013, 21:39 »
treat missus to holiday away at rainy scotland and i get a remap form stage 1 to 2  :grin:
Logged
2001 mk4 GTI 1.8t AUM. k&n induction kit with customer heat shield, 3'' TIP, Forge 007P, Stage 1 map, N249 bypass, 3'' downpipe and decat, 2.75'' Jetex cat back non res, Koni shockers and H&R springs 35mm, dimpled and grooved disks front and back

Offline barrym381

  • Forum addict
  • *
  • Posts: 5,934
Re: remap from ava glasgow
« Reply #6 on: 15 February 2013, 21:45 »
Quote from: davemk4 on 15 February 2013, 21:39
treat missus to holiday away at rainy scotland and i get a remap form stage 1 to 2  :grin:
1 day of snow this year aint much  :smug:
Logged

Offline markgti1.8t

  • Here all the time
  • ****
  • Posts: 366
Re: remap from ava glasgow
« Reply #7 on: 15 February 2013, 21:51 »
Quote from: barrym381 on 15 February 2013, 21:32
these guys they use revo stuff based in glasgow  :smiley:
https://www.facebook.com/KonzeptAutohaus

i have talk with the guy that does the maps he said

 Hi Mark I have a response from our head technical guy and he says that the 440cc injectors don't have the correct spray pattern and are too big for that setup. The ko4-01 is slightly smaller than a ko3s but with different wheels. The Maf sensor doesn't need to be that big either. So unfortunately Revo wont support a map with that hardware. I am sorry mate...

not going for the k04 any more going hybrid
« Last Edit: 15 February 2013, 21:59 by markgti1.8t »
Logged

AGU fk coilovers Powerflex top mounts full 3inch decat turbo back viper induction kit fmic vr6 clutch g60 flywheel catch can 007 forge dv Power flex wishbone bushes  Power flex dog mount under brace JOM  ADJUSTABLE Drop Links Walbro 255lph INLINE Fuel Pump wmi now fitted WAITING TO FIT VR6 MAF SAAB RED TOP INJECTORS STILL TO BUY K300 TURBO  CON RODS LSD

Offline barrym381

  • Forum addict
  • *
  • Posts: 5,934
Re: remap from ava glasgow
« Reply #8 on: 15 February 2013, 21:54 »
Quote from: markgti1.8t on 15 February 2013, 21:51
Quote from: barrym381 on 15 February 2013, 21:32
these guys they use revo stuff based in glasgow  :smiley:
https://www.facebook.com/KonzeptAutohaus

i have talk with the gay that does the maps he said

 Hi Mark I have a response from our head technical guy and he says that the 440cc injectors don't have the correct spray pattern and are too big for that setup. The ko4-01 is slightly smaller than a ko3s but with different wheels. The Maf sensor doesn't need to be that big either. So unfortunately Revo wont support a map with that hardware. I am sorry mate...

not going for the k04 any more going hybrid
best makin the travel to r-tech as im pretty sure they will help  :smiley: an when is cool to grab that air box off you
« Last Edit: 15 February 2013, 21:55 by barrym381 »
Logged
Pages: [1]
« previous next »