Author Topic: Door Module Question!  (Read 954 times)

Offline Mr_Orange

  • I live here
  • *****
  • Posts: 2,212
  • MK4 GTi Turbo Exclusive 150 AUM
Door Module Question!
« on: 05 February 2013, 21:45 »
Hi,
Unlock car, open passenger door, after about 30 secs its started randomly relocking itself?  Don't seem to be every time.  Is this something its meant to do and I never noticed or classic door module failure, ie dodgy soldering?  I'll try it again a few times before commiting to stripping the door down for a fix.   :sick:


Build thread clicky

Offline rio_gti

  • I live here
  • *****
  • Posts: 2,298
  • "i'm not spending any money on it" Got a Hybrid!
Re: Door Module Question!
« Reply #1 on: 05 February 2013, 21:53 »
Yep soldering!!!

Don't unlock then get in that side, throw the keys in then shut the door and walk round unless you got a spare!!!  :laugh:


2000 GTI 1.8t ARZ, S2000 filter, DSG intake, Forge 007 dv, Catch can, R-tech custom remap, 3" Supersize Silicone TIP, Powerflex dog bone, 'The Beast' FMIC, Ultimate delete, LCR fuel pump, 3" Turbo back, K03 hybrid, Ported Manifold, S3 injectors, 80mm maf = 280bhp 270lbft :evil:

Offline dom

  • 10k hero
  • *
  • Posts: 10,084
  • Back in a Mk4
Re: Door Module Question!
« Reply #2 on: 05 February 2013, 22:13 »
Not always soldering, could be a faulty microswitch :wink:

I took mine apart a few weeks ago & the solder looked fine, I re-soldered it anyway and it didn't solve it.

Offline Mr_Orange

  • I live here
  • *****
  • Posts: 2,212
  • MK4 GTi Turbo Exclusive 150 AUM
Re: Door Module Question!
« Reply #3 on: 06 February 2013, 18:55 »
The interior handle still activates the puddle light, the exterior one deffo doesn't anymore as I've tried it a dozen times.
Right....  :embarrassed:
I took the exterior handle off last week to repaint it, have I broken something taking it out or not put it back on correctly?
BALLLLLS!!!!!


Build thread clicky

Offline Mr_Orange

  • I live here
  • *****
  • Posts: 2,212
  • MK4 GTi Turbo Exclusive 150 AUM
Re: Door Module Question!
« Reply #4 on: 16 February 2013, 18:50 »
Just noticed that opening the suspect door from the inside still activates the puddle light?.... One last chance I thought was that the cable wasn't set right on the outer handle so I reset that further back... nope, still no light when opening the door from outside  :cry:
Would all this further clarify this is the same old issue, with the same old microswitch and the same old dodgy soldering in the module.


Build thread clicky

Offline paulhgti

  • GTI forum regular
  • ***
  • Posts: 226
  • GOLF 1.8T AUM 209bhp 228LB FT TORQUE
Re: Door Module Question!
« Reply #5 on: 17 February 2013, 00:25 »
I got a spare passenger front module (lock) laying around its the all black version.works fine.i ordered a drivers front and the idiots sent me that haha wasnt happy after stripping the door down only to have to do it again

AUM 209 BHP R-TECH STAGE 1 RE MAP,MILTEK CAT BACK 4MOTION EXHAUST,4MOTION VALANCES,PIPERCROSS FILTER,TINTS,WIND DEFLECTORS,BOOST LEAK,SANTA MONICA ALLOYS,35mm H&R LOWERING SPRINGS

Offline beppe2672

  • Here all the time
  • ****
  • Posts: 385
Re: Door Module Question!
« Reply #6 on: 17 February 2013, 12:02 »
I've had 3 of my door modules go man down since I've had my golf, 1 would lock at all, 1 kept unlocking itself and the other just didn't register when it was open (no courtesy lights) they all were down to dodgy solder.
1999 1.8t AGU, KNN Panel filter, Smoothed air box, Custom CAI, Forge 007 dv, REVO stage 1, 3" eBay TBE. Audi TT quickrack.

To come - A DIY hybrid K03 and a whole lot of supporting mods!

Offline Mr_Orange

  • I live here
  • *****
  • Posts: 2,212
  • MK4 GTi Turbo Exclusive 150 AUM
Re: Door Module Question!
« Reply #7 on: 27 February 2013, 20:51 »
Would the issue with the passenger door also affect function of the interior lights?  Now got an intermittent problem with all the interior lights!  Operate the little buttons up on the light unit or the visor vanity mirror switch, and no lights come on, but instead the door open symbol lights up on the dash?  Turn the light switch or button off and the dash thing goes out again?  Wierd!  :undecided:  CCM issue or more door module madness?


Build thread clicky