« previous next »
Pages: [1]

Author Topic: Jetex exhaust  (Read 977 times)

Offline Felton

  • GTI forum regular
  • ***
  • Posts: 190
Jetex exhaust
« on: 21 January 2013, 12:20 »
Hi guys after some help I'm looking at buying a second hand cat back jetex system now the guy told me that he had it on a 1.6 and then his tdi and have been told its a 2.75 bore so my question is will this fit my gti 1.8t with out any probs cheers for ur help guys just want to make sure before I buy it
Logged

Offline Wayne

  • Sir Postalot
  • *
  • Posts: 32,051
Re: Jetex exhaust
« Reply #1 on: 21 January 2013, 13:30 »
It will be fine, Jetex from memory make them 2.75 bore and sleeve to fit on the smaller engines.
Logged

Offline Felton

  • GTI forum regular
  • ***
  • Posts: 190
Re: Jetex exhaust
« Reply #2 on: 21 January 2013, 16:10 »
Cool cheers for ur help mate
Logged

Offline davemk4

  • I live here
  • *****
  • Posts: 694
Re: Jetex exhaust
« Reply #3 on: 21 January 2013, 20:00 »
my jetex cat back just arrived today  :cool:

the normal systems are 2.5'' but there top range ones are 2.75'' which is what mine is. what a system too!





Logged
2001 mk4 GTI 1.8t AUM. k&n induction kit with customer heat shield, 3'' TIP, Forge 007P, Stage 1 map, N249 bypass, 3'' downpipe and decat, 2.75'' Jetex cat back non res, Koni shockers and H&R springs 35mm, dimpled and grooved disks front and back

Offline stace110

  • Not said much yet
  • **
  • Posts: 71
Re: Jetex exhaust
« Reply #4 on: 21 January 2013, 20:04 »
Nice ...How much was it ...?
Logged
1999 AGU, sitting on Dotz 18's,forge 008p, r32 side skirts. satin silver....more to come

Offline Felton

  • GTI forum regular
  • ***
  • Posts: 190
Re: Jetex exhaust
« Reply #5 on: 21 January 2013, 20:10 »
Yes mate that's the same I think mate is that the resonated one mate as that's what I'm gettin
Logged

Offline davemk4

  • I live here
  • *****
  • Posts: 694
Re: Jetex exhaust
« Reply #6 on: 22 January 2013, 07:20 »
No none resonated  :cool:

Cost about 320 delivered.
Logged
2001 mk4 GTI 1.8t AUM. k&n induction kit with customer heat shield, 3'' TIP, Forge 007P, Stage 1 map, N249 bypass, 3'' downpipe and decat, 2.75'' Jetex cat back non res, Koni shockers and H&R springs 35mm, dimpled and grooved disks front and back
Pages: [1]
« previous next »