Author Topic: LOL just bought a Intel Pentium 4 Extreme Edition 3.73 GHz socket 775 (Read 6462 times)

justalex81 · « **Reply #20 on:** 18 January 2013, 23:18 »

jesus man let the old p4 die with dignity!!!!

clipperjay · « **Reply #21 on:** 20 January 2013, 14:28 »

Quote from: justalex81 on 18 January 2013, 23:18

jesus man let the old p4 die with dignity!!!!

NO shut it ALEX IT WANTS OVERCLOCKING TILL IT DIES i'M JUST HELPING IT ALONG ITS ALL

I'm running 64bit apps Win7 with all the trimmings and its quick so its telling me do it overclock me some more! even managed to run it on 1.5GB of ram LOOL @ 4-4-4-12 2.0v

justalex81 · « **Reply #22 on:** 20 January 2013, 23:47 »

yeah must be rapid!!!!

or not as the case maybe. . . . . .

golf-sib · « **Reply #23 on:** 21 January 2013, 03:00 »

Chill it down to subzero and see what you can get

clipperjay · « **Reply #24 on:** 21 January 2013, 10:01 »

Quote from: justalex81 on 20 January 2013, 23:47

yeah must be rapid!!!!

or not as the case maybe. . . . . .

No appreciation of the classics!

Quote from: golf-sib on 21 January 2013, 03:00

Chill it down to subzero and see what you can get

Done that already

justalex81 · « **Reply #25 on:** 21 January 2013, 17:00 »

it was pioneering in it's day. now it's a sack of sh1t

clipperjay · « **Reply #26 on:** 22 January 2013, 18:11 »

Quote from: justalex81 on 21 January 2013, 17:00

it was pioneering in it's day. now it's a sack of sh1t

You think about the direction Intel has gone six cores, nine cores same tech IMO, even some todays extreme chips have some cores turned off so they can rebrand them

I dont need to watch porn and prime for 5hours or is that the same?

"All multipler clocks are relative"

clipperjay · « **Reply #27 on:** 23 January 2013, 15:40 »

Parts arrived and started to sort the logistics out!
As you can see the holes for my Motherboard is completely off the LGA755 mounting system. I've decided to make a mounting plate out of polycarb but was worried about thickness of the plate as I didnt know if the compression fitttings would go over the mounting plate but luck on my side I ordered the 45 degree ones as the stem 1/4" was thinner than straight compression ones!
So fabracating the mounting plate soon and clean out the new rad and block with what not sure TBF?