1.8t electrics/clocks issue

[Screech16v]

Lol, it did feel like 4 months, i now have a steady oil light on all the time whilst running and no tacho ,thats it really,oh and my exhaust bangs abit at the rear,my oil light was flashing but i hadnt connected it.

[Screech16v]

Still stuck on the oil light and rev counter guys, HELP! I hate driving with oil warning on 

[CJA321]

What pressure sensors did you use? Sure its not a sensor issue? That or wiring.

[Screech16v]

ive got both high and low sensors from the abf fitted,one is open curcuit and one is closed curcuit cant remember which is which,they b oth checkout as working

[ant_gti]

did you use all 3 sensors from the abf?

[Screech16v]

Only using pressure switchs at the mo until i get the temp one rigged up,ive just been reading on another forum and its been said that the oil light can flash if the rev counter is not working,so to rule this out ,how do i get the rev counter to function as i believe (dont quote me on this) it takes  the engine speed signal from the coil,so what do i do as i dont have a coil anymore. 

[CJA321]

My speed sensor is on the box iirc. And im running an ABF box.

[Screech16v]

Is this the same sensor for the speedo then (3 pin connector)  as i have this fitted to my abf box also and my speedo works

[Screech16v]

Ive been told that the tacho gets its signal from the abf ecu,how will i make it work with the agu ecu if this is the case?

[CJA321]

I think you use a mk4 sensor. Im really not sure though tbh, because the box i got was Brads old box and was set yp for the conversion when i bought it. Was all plug and play