« previous next »
Pages: [1]

Author Topic: MAF sensors - Compatability  (Read 960 times)

Offline pickles

  • I live here
  • *****
  • Posts: 769
  • Next!!!
MAF sensors - Compatability
« on: 17 October 2012, 21:43 »
will a maf sensor from a ARZ/AUM/ fit an AGU. its fooked.  unplugged it and its running alot better but guessing i need to get it changed pronto. cheers
Logged
weirdos on here i tell you ;)
mk4 golf 1.8T, AGU, CAI, Forge007p DV,TIP,Decat, Bilsteins with Koni springs dropped 40mm
Mapped

Nearly S3 time  :)

Offline Dalo Harkin

  • I live here
  • *****
  • Posts: 2,070
Re: MAF sensors - Compatability
« Reply #1 on: 19 October 2012, 07:28 »
I thought they were all exactly the same  :undecided:
Logged
ARZ K03s, Oettinger Side Skirts, R32 front, Carbon stage 2, Forge 007p (yellow spring), Forge Actuator (yellow spring), Pipercross panel filter with DSG parts, N249 and N112 deleted, SAI deleted, Carbon canister deleted, Rear wiper deleted, Long Life turbo back custom exhaust with 200 cell sports cat, VR6/G60 clutch kit, Creation Motorsport TIP, Catch can, 'Wellycooler', K04 charge pipe, S3 ported inlet manifold - looks pretty standard on the outside though :)

Offline Prawny

  • Here all the time
  • ****
  • Posts: 456
  • R-tech power!!!
Re: MAF sensors - Compatability
« Reply #2 on: 19 October 2012, 07:35 »
NO, won't fit.

AGU sensors sit in a different orientation, and have a totally different plug with 1 less wire in there too.

Never going to fit in a million years.

sadly, with the AGU you don't get much choice. Genuine ones are £200+ and they don't do exchange on genuine ones either.
Logged

Offline pickles

  • I live here
  • *****
  • Posts: 769
  • Next!!!
Re: MAF sensors - Compatability
« Reply #3 on: 19 October 2012, 19:01 »
cheers m8, new 1s on and alls good :)
Logged
weirdos on here i tell you ;)
mk4 golf 1.8T, AGU, CAI, Forge007p DV,TIP,Decat, Bilsteins with Koni springs dropped 40mm
Mapped

Nearly S3 time  :)

Offline pickles

  • I live here
  • *****
  • Posts: 769
  • Next!!!
Re: MAF sensors - Compatability
« Reply #4 on: 19 October 2012, 19:05 »
Quote from: Prawny on 19 October 2012, 07:35
NO, won't fit.

AGU sensors sit in a different orientation, and have a totally different plug with 1 less wire in there too.

Never going to fit in a million years.

sadly, with the AGU you don't get much choice. Genuine ones are £200+ and they don't do exchange on genuine ones either.


you can get a bosch one from ECP m8 with a £42 surcharge, thats £117.60 with discount 
Logged
weirdos on here i tell you ;)
mk4 golf 1.8T, AGU, CAI, Forge007p DV,TIP,Decat, Bilsteins with Koni springs dropped 40mm
Mapped

Nearly S3 time  :)
Pages: [1]
« previous next »