Author Topic: Should I fit my ko3s???  (Read 3476 times)

Offline phatsam2003

  • GTI forum regular
  • ***
  • Posts: 184
  • mk4 1.8T
Should I fit my ko3s???
« on: 08 September 2012, 09:28 »
Hi ppl, not been on here for ages and things have changed quite a lot!! anywho....

I've had a KO3s for a while now and just haven't got around to fitting it!

Basically I think the turbo needs changing as the cars burning oil hence why I bought the ko3s. My predicament is if I fit the ko3s I can't really afford a fresh remap (the car is already mapped with a ko3) and I'm also worried about the clutch giving up with the extra power, which I also couldn't afford to replace.

My question is...

Should I just stick the ko3s on and leave it without a fresh map?

or

Just fit another ko3 and leave it as is

The car is an AGU on 199500 which was mapped when I bought it, then I fitted...
Turbo back stainless Milteck exhaust
oo7p
silicone tip
plus a whole lot of other things that aren't really relevant to my question!

Any input is appreciated  :smiley:

Offline Granta Gti

  • I live here
  • *****
  • Posts: 774
Re: Should I fit my ko3s???
« Reply #1 on: 08 September 2012, 21:26 »
I'll swap my ko3 for you ko3s and fit them both ?! :grin:

Offline peterg60

  • Not said much yet
  • **
  • Posts: 52
Re: Should I fit my ko3s???
« Reply #2 on: 08 September 2012, 21:42 »
you can get ko3 for very cheap on ebay. few options you could look at.

first have your ko3 turbo rebuilt i know some 1 who can do this for £110
second buy a ko3 of ebay they go for like £50-£100 but can be a bad turbo you wont know untill you fit it. if its good use it and save for a remap for ko3s.

Offline 1.8t.jim

  • Not said much yet
  • **
  • Posts: 83
Re: Should I fit my ko3s???
« Reply #3 on: 09 September 2012, 10:19 »
im fitting my ko3s on to a standard AGU with standard power it will be fine untill its remapped mate :)

Offline dan2252

  • Here all the time
  • ****
  • Posts: 373
Re: Should I fit my ko3s???
« Reply #4 on: 09 September 2012, 22:35 »
Mines mapped on a ko3 buts running a ko3s, fit the ko3s you wOnt regret it :) clutch will be fine it's not like your adding loads mOre power :)
MK4 golf 1.8 turbo agu :)

Offline Dalo Harkin

  • I live here
  • *****
  • Posts: 2,070
Re: Should I fit my ko3s???
« Reply #5 on: 10 September 2012, 17:53 »
199500

How much  :shocked:
I would put it on if I were you but you need a remap too
ARZ K03s, Oettinger Side Skirts, R32 front, Carbon stage 2, Forge 007p (yellow spring), Forge Actuator (yellow spring), Pipercross panel filter with DSG parts, N249 and N112 deleted, SAI deleted, Carbon canister deleted, Rear wiper deleted, Long Life turbo back custom exhaust with 200 cell sports cat, VR6/G60 clutch kit, Creation Motorsport TIP, Catch can, 'Wellycooler', K04 charge pipe, S3 ported inlet manifold - looks pretty standard on the outside though :)

Offline 1.8t.jim

  • Not said much yet
  • **
  • Posts: 83
Re: Should I fit my ko3s???
« Reply #6 on: 10 September 2012, 18:08 »
i thought my 1999 AGU was high mileage and mine is only 100k with everything standard atm

Offline dan2252

  • Here all the time
  • ****
  • Posts: 373
Re: Should I fit my ko3s???
« Reply #7 on: 10 September 2012, 18:10 »
MInes on 190k :) no gay aum would do that ;)
MK4 golf 1.8 turbo agu :)

Offline 1.8t.jim

  • Not said much yet
  • **
  • Posts: 83
Re: Should I fit my ko3s???
« Reply #8 on: 10 September 2012, 20:25 »
exactly :tongue:

Offline 212hpdazza

  • GTI forum regular
  • ***
  • Posts: 107
  • agu bigger ports
Re: Should I fit my ko3s???
« Reply #9 on: 10 September 2012, 21:25 »
mines just hit 140000 :)

indi bolf agu