Whats this for?

[Rmachines]

It might be the same dash loom with the plug, but terminates at the fuse box,  so you would have to add the front engine room harnes into the fuse box and the rest will be there for you.

[FlashRedThree]

Urghh that sounds tedious....thanks.

[thai-wronghorse]

All cars as far as im aware came with the plug fitted in the dash loom but as the headlight levellers were an optional extra the front section of loom wont be there. it'sd very easy to change and can be done in 30mins with no electrical faffing or wire cutting involved. It's a simple plug and play swap over.

[madmanmart]

All cars as far as im aware came with the plug fitted in the dash loom but as the headlight levellers were an optional extra the front section of loom wont be there. it'sd very easy to change and can be done in 30mins with no electrical faffing or wire cutting involved. It's a simple plug and play swap over.

Yep all you need to do is change the slam panel wiring loom for one the headlight adjusters.

The rest of the car is wired for it so its a simple job.

[benvictors]

Pretty sure the early spec 3's didn't have the red plug on the car loom so if you are pre 95, double check you have the red plug there first before going out and buying the loom, adjusters etc