« previous next »
Pages: [1]

Author Topic: Wishbone Bushes :-  (Read 1039 times)

Offline Xtrhardcore

  • Here all the time
  • ****
  • Posts: 404
  • Mk3 Gti 2.0 8v MoreDoor
Wishbone Bushes :-
« on: 26 July 2012, 14:58 »
Anyone got a decent method of getting the old ones out and the new ones in? Or a cheeky guide  :wink: Havnt got access to a vice or a press? :grin:

thank you!
Logged
Mk4 Gti - Gone but not forgotten!

Offline DunnDeal12

  • Limited
  • I live here
  • *
  • Posts: 704
Re: Wishbone Bushes :-
« Reply #1 on: 26 July 2012, 15:11 »
hacksaw and chisel to get the old ones out, then i used a vice to put the new ones in.
Logged

Offline Xtrhardcore

  • Here all the time
  • ****
  • Posts: 404
  • Mk3 Gti 2.0 8v MoreDoor
Re: Wishbone Bushes :-
« Reply #2 on: 26 July 2012, 15:14 »
Righto! i'll give it a good guy this weekend, are the wishbones themselves hard to get off? Putting my lowering springs on this weekend too, should i do it all in one hit? :)
Logged
Mk4 Gti - Gone but not forgotten!

Offline DunnDeal12

  • Limited
  • I live here
  • *
  • Posts: 704
Re: Wishbone Bushes :-
« Reply #3 on: 26 July 2012, 17:39 »
wishbones are easy x2 bolts in the subframe and ball joint, id try do it all in 1 sitting but dont rush it take your time.
Logged

Offline Wisey

  • Not said much yet
  • **
  • Posts: 81
Re: Wishbone Bushes :-
« Reply #4 on: 27 July 2012, 12:53 »
If you dont have a vice to push them in.

Use a big hammer and some grease and WD40 and they will go in no bother  :smug:
Logged

Offline Xtrhardcore

  • Here all the time
  • ****
  • Posts: 404
  • Mk3 Gti 2.0 8v MoreDoor
Re: Wishbone Bushes :-
« Reply #5 on: 27 July 2012, 14:08 »
I'll give that a go, time for my mate 'persuader'
Logged
Mk4 Gti - Gone but not forgotten!
Pages: [1]
« previous next »