any tips on rolling the fenders on a mk3?

[search]

Borrowing a arch roller and really dont want to mess it up. i dont need much doing just a slight rub on rear and when steering at front. looked on youtube and seen on a mk4 you cant really roll the rear is this the case on a mk3?

another question i have is should i take off the arch liner thing? and keep them off? thanks people.

Ps did actually search ;-)

[mrsaunders]

Tips

Tip 1) dont call them fenders

That is all

P.s you can do the rear but depending how much you do the paint will crack

[search]

Tips

Tip 1) dont call them fenders

That is all

P.s you can do the rear but depending how much you do the paint will crack

What should i call them? youtube got better results looking for fenders. (honestly don't need to do much)

[tweed]

Get a heat gun and heat the paint then roll, it won't crack.
I cut the liners and put them back in.

Take your time and do little bit at a time.

[Dan_GTi8v]

you get more results looking for fenders because that's what the yanks call them

[vwwvgolf]

i would prepare your self for touching up...

[Screech16v]

No touching up will be required as long as you get the arch hot enough,when i did mine i got them so hot as you could not touch it for very long,no cracking 

[search]

No touching up will be required as long as you get the arch hot enough,when i did mine i got them so hot as you could not touch it for very long,no cracking 

do i take out the lining stuff as its came away anyways!

this is all just a test on my front arches as they need replacing due to rust but though id see how it goes before i replace them!

[N900 MJT]

Also want to do mine - Get some pics up once you have done yours