Author Topic: epc/ stalling problem 1.8t  (Read 1386 times)

Offline chloe gti

  • Just got here
  • *
  • Posts: 5
epc/ stalling problem 1.8t
« on: 08 July 2012, 20:16 »
hi all. having a problem with my 1.8t gti, the car stalls when coming up to a junction, or to a set of lights when the car is allowed to return to idle with the clutch depressed. The car then stalls. when you then crank it over it sounds very laboured to do so and then the epc light stays on on the rev counter. then the car has a very fast idle 1200rpm and when you accelerate hard the car cuts the revs at 4k. when turned off and left for half hour or so it seems to reset itself and return to normal until it stalls again.

any ideas as its doing my head and my husbands head in as to what it could be?

Offline harlemex

  • I live here
  • *****
  • Posts: 2,023
Re: epc/ stalling problem 1.8t
« Reply #1 on: 08 July 2012, 20:35 »
scan for codes. 

Offline chloe gti

  • Just got here
  • *
  • Posts: 5
Re: epc/ stalling problem 1.8t
« Reply #2 on: 08 July 2012, 20:41 »
a friend of my husbands has a "solus" machine i think, is that the sort of thing?

Offline harlemex

  • I live here
  • *****
  • Posts: 2,023
Re: epc/ stalling problem 1.8t
« Reply #3 on: 08 July 2012, 21:34 »
solus?? thats a self tanning machine aint it?  :grin:

Offline JimBR

  • I live here
  • *****
  • Posts: 569
Re: epc/ stalling problem 1.8t
« Reply #4 on: 08 July 2012, 21:58 »
Nah a snap on goodie I think  :grin:

Offline Hoggy

  • Here all the time
  • ****
  • Posts: 490
  • Mk4 GT TDI 150.
Re: epc/ stalling problem 1.8t
« Reply #5 on: 08 July 2012, 22:10 »
Yea Solus is from the Snap On range, will do the job!

Offline pickles

  • I live here
  • *****
  • Posts: 769
  • Next!!!
Re: epc/ stalling problem 1.8t
« Reply #6 on: 09 July 2012, 01:06 »
dreaded MAF  :sad:
weirdos on here i tell you ;)
mk4 golf 1.8T, AGU, CAI, Forge007p DV,TIP,Decat, Bilsteins with Koni springs dropped 40mm
Mapped

Nearly S3 time  :)