Enjoy
Took me about 8 hours, but only due to struggling to get the box back in. Had the box out and clutch changed in approx 3 hours.
My quick guide by memory!
Front wheels off and undo drive shafts.
Undo dogbone mount.
Undo the 3 bolts holding the box in.
Then undo starter motor as it has 2 bolts holding it on.
Brace the engine and undo the left hand engine mount and drop the box down.
Remember about the bolt on the front by the sump.
Wiggle of the box.
Celebrate!
Lots of torx bolts holding the clutch on, undo and pull off.
6 big bolts holding the other bit to the flywheel - I airgunned off.
Remove and pull off flywheel.
Celebrate again!
When rebuilding note the 6 big bolts can only go back in one way - don't freak out about them not lining up like I did.
Clutch cover has to go on a certain way too.
Box back on - struggle a lot as not much space.
Bolt up, driveshafts back on and dogbone on.
DONE CELEBRATE!
