Ok so tryed that, unfortunatly no change! I also have a spare dissy laying around but it didn't work with that one. At least i know the hall sensors ok.
Any other ideas anyone? also i scanned it to day and it came up with errors that weren't there before. Don't know exactly what they mean but there making me think the timing is still off
-------------------------------------------------------------------------------
Address 01: Engine
Controller: 037 906 025 H
Component: SIMOS 4S 1964
Coding: 00000
Shop #: WSC 01317
4 Faults Found:
00515 - Camshaft Position (Hall) Sensor (G40)
16-00 - Signal Outside Specifications
00537 - Shareware Version. To Decode all DTCs
18-00 - Please Register/Activate
00282 - Shareware Version. To Decode all DTCs
44-10 - Please Register/Activate - Intermittent
00520 - Air Mass / Air Flow Sensor (G70)/(G19)
31-10 - Open or Short to Ground - Intermittent
Readiness: N/A
------------------------------------------------------------------
The airflow sensor (thats the maf right?) is odd cos thats deffinatly never come up before. i Did give all the air intake stuff a good clean so might have knocked a wire loose or some thing. But due to the fact its running the same i dont think it that!
Any help would be great. Verging on taking to a real mechanic, but feel like thats a cop out after changing the whole engine my self lol.
