Goodridge hose kits

[gti gaz]

hum i like very much i have been thinking of r 32 frunts and mk 4 rears with uprated pipes 

[F17BAD]

I fitted the S3 front set up to match my engine along with Ceramic pads


GTI discs Versus the S3

[Ess_Three]

hum i like very much i have been thinking of r 32 frunts and mk 4 rears with uprated pipes 

You will need at least 17" wheels then.
And then, only some 17" wheels clear the R32 front brakes...mostly 18s required.

[Ess_Three]

I fitted the S3 front set up to match my engine along with Ceramic pads

Same here...they seem up to the job.

[Wayne]

hum i like very much i have been thinking of r 32 frunts and mk 4 rears with uprated pipes 

And then, only some 17" wheels clear the R32 front brakes...mostly 18s required.

If R32 is the same as the Cupra R set up then 17"s tend to need spacers from the threads I have seen.

[F17BAD]

hum i like very much i have been thinking of r 32 frunts and mk 4 rears with uprated pipes 

And then, only some 17" wheels clear the R32 front brakes...mostly 18s required.

If R32 is the same as the Cupra R set up then 17"s tend to need spacers from the threads I have seen.

no mate different slightly bigger

must be to help stop all the weight of the R32 (slow cars IMO)

the 312 upgrade is more than enough especially when you use a decent pad.. forget fancy looking discs too, OEM plain ones are the best

[thai-wronghorse]

I thought R32 were 323mm and the Cupra R were 312mm?

[Wayne]

I thought R32 were 323mm and the Cupra R were 312mm?

Standard Cupra (180bhp) is 312mm same as Octavia vRS, Cupra R has the Brembo set up with 323mm brakes

[thai-wronghorse]

Ah of course, I remember seeing the red Brembo calipers on the 'R's now.

[F17BAD]

R32 and TT 3.2 V6.. and Audi A3 3.2v6 use 334mm fronts

Cupra R is 323mm

Audi S3, TT 225 bhp, Golf 4mo, VRs Octy, Golf GTI AUQ 180 bhp and Leon Cupra 180 bhp is 312mm

312mm just fit behind 16". and very powerfull braking on the lighter mk3 shell.

You would need the 6mm spacers to make the calipers fit. we made mine as a 1 piece spacer.. as per pics in my build thread