Flywheel

[navmk4gti]

Lets hope stays that way 

Gonna order mine in 2 weeks 

Will paste in what seller messages me back too

[Dave_IOW]

I would never advise this normally as mk3 related lol 

Breaking for spares section, and message people breaking ABF engine coded mk3's, same wheel and should be able to get one for £40ish posted..

[JimBR]

£188 + postage seems a bargain! 

[navmk4gti]

I would not buy a used flywheel or clutch ...I think its a bargain for sachs kit as jim Said..  Comes to major mechanicaly stuff best buy new

[Dave_IOW]

A flywheel you can buy in complete confidence 2nd hand, always buy a clutch new though   

[dam088888]

Just had this done fly wheel and clutch go OEM mate nit g60 you wont gain any benifits from a singal mass only that if clutch goes you won't need to replace fly wheel again. It will mate your clutch noise on ideal and the pedal will feel sh!t just my opinion  I had fly wheel and clutch done for 315 fitted with luk parts

[navmk4gti]

This is what seller replied 
...

Good morning, yes, they are 100% genuine and we put a 4 year/ 40,000 mile warranty on them.

Thanks for double checking first.

Regards.

Frank.

- techniclutch

[navmk4gti]

Just had this done fly wheel and clutch go OEM mate nit g60 you wont gain any benifits from a singal mass only that if clutch goes you won't need to replace fly wheel again. It will mate your clutch noise on ideal and the pedal will feel sh!t just my opinion  I had fly wheel and clutch done for 315 fitted with luk parts

Iv heard it only makes pedal light not heard nothing about noise etc 

[JimBR]

I've heard they make a noise in a TDI but not in a petrol. When mine goes it'll be the techniclutch kit I'll be going for. The Sachs VR6 clutch should be good for 300ft/lb which is more than I will probably need.

[richw911]

A flywheel you can buy in complete confidence 2nd hand, always buy a clutch new though   

Not a DM though