Author Topic: fitting a bleed valve to AGU engine  (Read 1451 times)

Offline cossiemark

  • GTI forum regular
  • ***
  • Posts: 197
fitting a bleed valve to AGU engine
« on: 03 March 2012, 16:20 »
my cousin has an audi a3 with a agu engine fitted and he wants to know where to fit his bleed valve any info would be most apreciated. Cheers mark

Offline Wazzzer

  • Moderator
  • 10k hero
  • *****
  • Posts: 11,172
  • Golf GTI 1.8T AGU
Re: fitting a bleed valve to AGU engine
« Reply #1 on: 03 March 2012, 18:55 »
ask him if he values his engine first...


1999 1.8T: R-Tech remap - 225bhp/256lb/ft : K03s : THS FMIC : THS PCR pipe : 2.5" stainless exhaust : THS FR3 Engine mounts : G60/VR6 clutch : Calibra Yellow injectors : VR6 MAF : Devils Own WMI : Forge 007p : Carbonio CAI : Leon Cupra R Brembos : FK AK Street coilovers : Votex skirts : Anniversary front : click ---> http://www.golfgtiforum.co.uk/index.php?topic=92175

Offline Wayne

  • Sir Postalot
  • *
  • Posts: 32,051
Re: fitting a bleed valve to AGU engine
« Reply #2 on: 03 March 2012, 21:37 »
Better to save for a proper remap.

Offline golf-sib

  • I live here
  • *****
  • Posts: 1,652
  • Турботазик
Re: fitting a bleed valve to AGU engine
« Reply #3 on: 07 March 2012, 23:21 »
You can fit a bleed valve in several ways depending what valve it is and what you are trying to achieve, some work where they limit air flow, others work like a DV once the peak pressure is achieved they open up due to the spring in place...

TBH I got a bleed valve setup and only thing I noticed with it cranked up on the remap was poor mpg and not any performance going by my boost gauge.


Audi TT - K04 TFSI Hybrid - 325BHP
VW Golf - k03 AGU - 200BHP

1.8T AGU..
R135
╚╬╬╝
  24


My Chinese Bike project: http://xtrsproject.wordpress.com/