Author Topic: Hill Assist Retro Fit  (Read 2301 times)

Offline Fiyero

  • Just got here
  • *
  • Posts: 4
Hill Assist Retro Fit
« on: 09 February 2012, 23:27 »
Hi

Does anyone know if the hill assist feature can be retro-fitted

Many thanks

Offline RedHP

  • I live here
  • *****
  • Posts: 621
Re: Hill Assist Retro Fit
« Reply #1 on: 10 February 2012, 17:59 »
Handbrake  :grin:

Sorry pal, not sure although it may be wise not spending too much ca$h on this if it is available aftermarket, it only holds for a couple of seconds anyway.
I have never really used/relied on mine

Red
Mk6 GiT since birth in 2010

YNWA

Offline Keithuk

  • I live here
  • *****
  • Posts: 837
Re: Hill Assist Retro Fit
« Reply #2 on: 11 February 2012, 11:28 »
2010 Golf GTD (170) CBBB, 5 Door, Shadow Blue (P6/D5Q), Flat Tyre Indicator, Basic Protection Pack + VCDS.

Offline JonnyG

  • I live here
  • *****
  • Posts: 888
Re: Hill Assist Retro Fit
« Reply #3 on: 11 February 2012, 12:43 »
Make sure you feel it's worth the extra £££'s first IMHO 

I'd pay (well a little bit anyway!) NOT to have it  :grin:

I prefer to do it myself with the handbrake and/or left foot braking 
Current : Seat Cupra Lux, DSG, Magnetic Grey, Sept 2019
Gone :    Golf Mk 7 R, 5dr DSG, Pure White, March 2017
Gone :    Golf Mk 7 R, 5dr DSG, Tornado Red, March 2015
Gone :    Audi RS3, Daytona Grey, 7sp S-Tronic, Sept 2012
Gone :    Golf R, Rising Blue, 5dr DSG Mar 2010
Gone :    Golf R32, DBP, 5dr, DSG, Nov 2008
Gone :    Golf GTi ED30, Mar 2007

Offline Fiyero

  • Just got here
  • *
  • Posts: 4
Re: Hill Assist Retro Fit
« Reply #4 on: 12 February 2012, 01:24 »
Yes it's hill hold I'm after, is it possible as a retro fit?

Offline Ess_Three

  • I live here
  • *****
  • Posts: 3,123
Re: Hill Assist Retro Fit
« Reply #5 on: 12 February 2012, 06:13 »
Handbrake  :grin:

I've always found the handbrake perfectly functional in the past...and see no need for an unreliable piece of electronics to replace a mechanical cable, so I shall continue using the handbrake as long as one is fitted.  :grin:

Reducing my Golf count by the week....
..but gaining motorcycles.

Offline Keithuk

  • I live here
  • *****
  • Posts: 837
Re: Hill Assist Retro Fit
« Reply #6 on: 12 February 2012, 14:29 »
Yes it's hill hold I'm after, is it possible as a retro fit?

Well if you have read my thread link you would have seen Yes, you can add Hill Hold Contol to 2010 MTs, do you have access to VCDS?
2010 Golf GTD (170) CBBB, 5 Door, Shadow Blue (P6/D5Q), Flat Tyre Indicator, Basic Protection Pack + VCDS.

Offline RedHP

  • I live here
  • *****
  • Posts: 621
Re: Hill Assist Retro Fit
« Reply #7 on: 14 February 2012, 15:13 »
Make sure you feel it's worth the extra £££'s first IMHO 

I'd pay (well a little bit anyway!) NOT to have it  :grin:

I prefer to do it myself with the handbrake and/or left foot braking 

Left foot braking.....our very own Stig  :wink:

Red
Mk6 GiT since birth in 2010

YNWA

Offline Edi35

  • Here all the time
  • ****
  • Posts: 468
Re: Hill Assist Retro Fit
« Reply #8 on: 14 February 2012, 16:55 »
Hill hold is a great feature on DSG but not essential as I used to use the hand brake on my ED30 with DSG, however I can't see this being required on a manual.
Current: GTI Edition 35 Candy White 5dr DSG 19" Glendale, RCD510+DAB, Dynaudio, Storage Pack, Parking Sensors

Gone: Edition 35, GTI Mk6, Edition 30, GTI Mk4, GTI Mk3, GTI Mk2 and my favourite the UR quattro
For those that dont know DSG is an electronically controlled dual-clutch multiple-shaft manual gearbox