Agu head on aum car.. Egr question

[gti_boz]

Just wondered if you can get rid of the egr valve and pipes because the agu head doesnt have the hole in the side of the head like the aum head does.. Noticed it goes to the dump valve to.. (sorry if I'm not explaing very well)  it a aum set up 2002 reg so aum loom etc etc then want to fit agu head

If needs be I can take pics..

[topher]

so long as you're appropriately bypassing the functions of the combivalve (n249 and secondary air injection) it'll be fine. I seem to read a lot about VVT issues when swapping to an AGU head too

[gti_boz]

so long as you're appropriately bypassing the functions of the combivalve (n249 and secondary air injection) it'll be fine. I seem to read a lot about VVT issues when swapping to an AGU head too

Can I not just change the sensors for the vvt? :/

[topher]

you can swap the vvt bits on to the agu head. oh and don't forget you'll need an AGU inlet manifold gasket to suit the porting you're going to have to do to your inlet

[gti_boz]

you can swap the vvt bits on to the agu head. oh and don't forget you'll need an AGU inlet manifold gasket to suit the porting you're going to have to do to your inlet

The gasket matches up though mate?