Author Topic: how do i change a gearbox ?  (Read 1055 times)

Offline kaine2010

  • Not said much yet
  • **
  • Posts: 28
how do i change a gearbox ?
« on: 22 December 2011, 17:58 »
I have a 1996 golf gti 2ltr and having problems with gear shifts :( I am also stripping a 1993  gti and don't know if I can take the gear box off the older one and replace mine is it possible to do myself if so is there any links on how I go about taking one off ? Please help !!! There both 8valve 5 gear box

Offline Seanl

  • I live here
  • *****
  • Posts: 2,561
Re: how do i change a gearbox ?
« Reply #1 on: 23 December 2011, 07:12 »
Have a look in the mk3 maintenance and info section. Jack up car and support on axle stands (get it as high as you can. Support engine on jack. Undo driveshafts at the gearbox and support them with rope from above. Undo gearbox mount from above, Undo 3 bolts holding gearbox to engine, manoeuvre out. Simples!
Classic Green Corrado VR6 Storm | Jetex Cat back | BMC CDA | VT mounts | Bilstein B12 | 288mm front brakes | Mk4 rear brakes | Goodridge braided hoses | BBS RX228s | Shortshifter | Lupo wipers | Uprated headlight loom | All red rears | Refreshed leather | Fresh paint |

Offline Diamond Hell

  • Serious forum addict
  • *
  • Posts: 7,997
  • Opinions я Us
Re: how do i change a gearbox ?
« Reply #2 on: 23 December 2011, 14:46 »
Save yourself the skinned knuckles and aggravation and scrap them.

At the current scrap prices you should have enough to buy another T&T Golf3 from the proceeds of two scrapped ones.  :grin:
Just because you're offended doesn't make you right.

Holiday cottages on the Isle of Wight for 2-10 people? PM me.

Offline Gti_Jamo

  • I live here
  • *****
  • Posts: 1,113
  • 1991 Corrado 1.8 G60
Re: how do i change a gearbox ?
« Reply #3 on: 23 December 2011, 15:06 »
I have a 1996 golf gti 2ltr and having problems with gear shifts :( I am also stripping a 1993  gti and don't know if I can take the gear box off the older one and replace mine is it possible to do myself if so is there any links on how I go about taking one off ? Please help !!! There both 8valve 5 gear box

Is it crunching between gears? If its an 8v and its just stiff it could be just the linkage assembly that needs some attention.


97' Mk3 Golf Gti 2.0 8v Rebuild Project http://www.golfgtiforum.co.uk/index.php?topic=208865.0

Offline kaine2010

  • Not said much yet
  • **
  • Posts: 28
Re: how do i change a gearbox ?
« Reply #4 on: 23 December 2011, 15:18 »
Ok thanks for the info Guna look at it when the weathers a bit better its stiff getting in gear. And sometimes it crunches then some tine its absolutly fine going to change transmissions oil see if that solves anything its also running at 102 oc when in traffic not sure if that's too good :( may have to scrap them both at this rate